Ford Fiesta 2010 Owner's Handbook Manual page 91

Starting with automatic
transmission
Note: Releasing the brake pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Make sure the transmission is in P or
N.
2. Fully depress the brake pedal.
3. Briefly press the start button.
Starting with manual
transmission
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Fully depress the clutch pedal.
2. Briefly press the start button.
Starting a diesel engine
Note: Engine cranking will not
commence until the engine glow plug
cycle has been completed. This may take
several seconds in extremely cold
conditions.
Note: Continue to press the clutch or
brake pedal until engine cranking begins.
Failure to start
The passive starting system will not
function if:
• The passive key frequencies are
jammed.
• The passive key battery is flat.
If you are unable to start your vehicle carry
out the following procedure.
Starting the engine
89
E99666
1. Hold the key next to the steering
column shroud exactly as shown.
2. With the key in this position you can
use the start button to switch the
ignition on and start your vehicle.
Stopping the engine with the
vehicle stationary
Note: The ignition, all electrical circuits,
warning lamps and indicators will be
switched off.
Manual transmission
Press the start button.
Automatic transmission
1. Move the selector lever to position P.
2. Press the start button.
Stopping the engine when the
vehicle is moving
WARNING
Switching off the engine when the
vehicle is still moving will result in a
loss of brake and steering
assistance. The steering will not be
locked, but higher effort will be required.
When the ignition is switched off some
electrical circuits, warning lamps and
indicators may also be OFF.