Removing A Headlamp; Changing A Bulb - Ford Fiesta 2010 Owner's Handbook Manual

The courtesy lamp will also come on when
you switch off the ignition. It will go off
automatically after a short time or when
you start or restart the engine.
If you set the switch to position C with the
ignition switch off, the courtesy lamp will
come on. It will go off automatically after
a short time to prevent the vehicle battery
from discharging. To switch it back on,
switch on the ignition for a short time.
Reading lamps
E112208
If you switch off the ignition, the reading
lamps will go off automatically after some
time to prevent the vehicle battery from
discharging. To switch them back on,
switch on the ignition for a short time.

REMOVING A HEADLAMP

1. Open the bonnet. See Opening and
closing the bonnet (page 128).
E102589
Lighting
2. Remove the screws.
E102590
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp
in the retaining clips.

CHANGING A BULB

2
Headlamp
Direction indicator
1. Remove the headlamp. See
Removing a headlamp (page 50).
50
3
WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 55).
4