Ford Fiesta 2010 Owner's Handbook Manual page 147

E121887
1. Install the locking wheel nut key.
2. Slacken the wheel nuts.
E113399
3. Install the jack to the flange.
4. Extend the jack until the base of the
jack is flat on the ground, vertically
below the jacking point.
Wheels and tyres
1
2
145
E113400
5. Jack up the vehicle until the tyre is
clear of the ground.
6. Remove the wheel nuts and the
wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical specifications (page 150).
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer
for more details regarding compatibility.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from foreign
matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.