Horizon Fitness HORIZON SERIES T90 User Manual page 6

AS SE MB LY ST EP 
HARDWARE BAG  CONTENTS :
BOLT (F)
25 mm
Qty: 4
CONSOLE
FLAT WASHER (D)
SPRING WASHER (C)
BOLT (F)
A Open HARDWARE BAG .
B With running deck in lowered position, place CONSOLE on the console masts. Align the
brackets that are underneath the console with the top holes of the console masts.
C To assemble the CONSOLE to the LEFT CONSOLE MAST, insert 1 BOLT (F),
1 SPRING WASHER (C) and 1 FLAT WASHER (D) into the 2 holes in the
LEFT CONSOLE MAST and lightly tighten.
D Locate CONSOLE CABLE COVER on back of CONSOLE and remove.
E Attach CONSOLE CABLE to CONSOLE BOARD. NOTE: Do not pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVER on back of CONSOLE and attach excess wire to CABLE TIE.
G Repeat STEP C above to assemble the RIGHT CONSOLE MAST to the CONSOLE.
NOTE: Do not completely tighten any screws or bolts until step 5 is complete!
10
T90_Rev.1.5.indd 10-11
SPRING WASHER (C) FLAT WASHER (D)
15 mm 15 mm
Qty: 4 Qty: 4
CONSOLE CABLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
LEFT CONSOLE MAST
ATTENTION!
Please note assembly changes to User's Guide.
NOTE: Assembly step D modified to reflect proper CONSOLE CABLE connection to CONSOLE.
A S S EMBLY S TE P 3 ASSEMBLY STEP  (CONTINUED)
STEP D
CONSOLE CABLE COVER
CABLE TIE
CONSOLE
BOARD
CONSOLE
CABLE
CONSOLE CABLE COVER
ASSEMBLY STEP  CABLE TIE
HARDWARE BAG  CONTENTS :
DECK
LOCK
LATCH
SCREWS (I)
LEFT HANDLEBAR
A Open HARDWARE BAG .
B Attach DECK LOCK LATCH to LEFT HANDLEBAR using 2 SCREWS (I).
C Slide the WATER BOTTLE HOLDER down into the hole in the CONSOLE and snap together.
CABLE TIE
CABLE TIE
D Locate CONSOLE CABLE COVER on
back of CONSOLE and remove. STEP E
CONSOLE
CONSOLE
BOARD
BOARD
CONSOLE
CONSOLE
CABLE
CABLE
E Attach CONSOLE CABLE to
STEP F
CONSOLE BOARD. NOTE: Do not
pinch CONSOLE CABLE.
CONSOLE CABLE COVER
CABLE TIE CONSOLE CABLE COVER
CABLE TIE
F Replace CONSOLE CABLE COVER on
back of CONSOLE and attach excess
wire to CABLE TIE.
SCREW (I)
15 mm
Qty: 2
WATER BOTTLE
HOLDER
E Attach CONSOLE CABLE to
E Attach CONSOLE CABLE to
CONSOLE BOARD. NOTE: Do not
CONSOLE BOARD. NOTE: Do not
pinch CONSOLE CABLE.
pinch CONSOLE CABLE.
F Replace CONSOLE CABLE COVE
F Replace CONSOLE CABLE COVER
back of CONSOLE and attach exce
back of CONSOLE and attach exces
wire to CABLE TIE.
wire to CABLE TIE.
11
9/10/08 4:21:04 PM