Figure 5-23: Setup Wizard's Wireless Security - Wep (128-Bit) Screen; Figure 5-24: Setup Wizard's Confirm New Settings Screen - Cisco Linksys WAG54GX2 User Manual

Wireless-G ADSL Gateway with SRX200
WEP (128-Bit)
Enter a passphrase or WEP key.
Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The
passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the
passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If
you have any non-Linksys wireless products, enter the WEP key manually on those products.)
Key 1 - The WEP key you enter must match the WEP key of your wireless network. For 128-bit encryption,
enter exactly 26 hexadecimal characters. Valid hexadecimal characters are "0" to "9" and "A" to "F".
Click the Next button to continue or the Back button to return to the previous screen.
17. The Setup Wizard will ask you to review your settings before it saves them. Click the Yes button if you are
satisfied with your settings, or click the No button if you do not want to save your new settings.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SRX200
Using the Setup Wizard
Figure 5-23: Setup Wizard's Wireless Security -
WEP (128-Bit) Screen

Figure 5-24: Setup Wizard's Confirm New Settings Screen

22