Figure 5-21: Setup Wizard's Wireless Security - Wpa2 Mixed Mode Screen; Figure 5-22: Setup Wizard's Wireless Security - Wep (64-Bit) Screen - Cisco Linksys WAG54GX2 User Manual

Wireless-G ADSL Gateway with SRX200
WPA2 Mixed Mode
Encryption - TKIP + AES is automatically selected so both methods can be used.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8 to 63 characters. The longer and more
complex your Passphrase is, the more secure your network will be.
Click the Next button to continue or the Back button to return to the previous screen.
WEP (64-Bit)
Enter a passphrase or WEP key.
Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. The
passphrase is case-sensitive and should not be longer than 16 alphanumeric characters. It must match the
passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If
you have any non-Linksys wireless products, enter the WEP key manually on those products.)
Key 1 - The WEP key you enter must match the WEP key of your wireless network. For 64-bit encryption,
enter exactly 10 hexadecimal characters. Valid hexadecimal characters are "0" to "9" and "A" to "F".
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SRX200
Using the Setup Wizard
Figure 5-21: Setup Wizard's Wireless Security -
WPA2 Mixed Mode Screen
Figure 5-22: Setup Wizard's Wireless Security -
WEP (64-Bit) Screen
21