Cisco Linksys WAG54GX2 User Manual page 91

Wireless-G ADSL Gateway with SRX200
WPA Personal. Select the type of algorithm, TKIP or AES, enter a password in the Passphrase field of 8-63
characters, and enter a Group Key Renewal period time between 0 and 99,999 seconds, which instructs the
Gateway or other device how often it should change the encryption keys.
WPA2 Personal. WPA2 gives you one encryption method, AES, with dynamic encryption keys. Enter a
Passphrase of 8-63 characters. Then enter a Group Key Renewal period, which instructs the Gateway how
often it should change the encryption keys.
WPA2 Mixed Mode. WPA2 Mixed Mode gives you TKIP+AES encryption. Enter a Passphrase of 8-63
characters. Then enter a Group Key Renewal period, which instructs the Gateway how often it should change
the encryption keys.
WPA Enterprise. This method is WPA used in coordination with a RADIUS server. Enter the IP address and
port number of the RADIUS server. Then enter the key shared between the Gateway and its RADIUS server.
Then enter a Key Renewal Timeout period, which instructs the Gateway how often it should change the
encryption keys.
WPA2 Enterprise. This method is WPA2 used in coordination with a RADIUS server. Enter the IP address and
port number of the RADIUS server. Then enter the key shared between the Gateway and its RADIUS server.
Then enter a Key Renewal Timeout period, which instructs the Gateway how often it should change the
encryption keys.
Implementing encryption may have a negative impact on your network's performance, but if you are transmitting
sensitive data over your network, encryption should be used.
These security recommendations should help keep your mind at ease while you are enjoying the most flexible
and convenient technology Linksys has to offer.
Appendix B: Wireless Security
Security Threats Facing Wireless Networks
84