Horizon Fitness CT9.1 Owner's Manual page 8

ASSEMBLY STEP 3
HArDWArE BAG 3 CONTENTS :
BOLT (A)
20 mm
Qty: 4
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
CONSOLE MAST
8
SPRING WASHER (B) ARC WASHER (C)
8.2 mm 8.2 mm
Qty: 4 Qty: 4
CONSOLE MAST BOOT
CONSOLE CABLES
Open HArDWArE BAG 3.
A
Slide ConSoLE through the ConSoLE
B
MAST BooTS.
NOTE: Make sure the arrows on the mast rings
are pointing upward towards the console when
sliding into place.
Connect ConSoLE CABLES.
C
NOTE: Be careful not to pinch any wires
CONSOLE
while assembling the right console mast.
Connect ConSoLE to riGHT ConSoLE
D
MAST using 2 BoLTS (A), 2 SPrinG
WASHErS (B) and 2 ArC WASHErS (C).
Repeat on other side.
E