Adjusting The Settings; Slide Show Options; Network Settings - HP Passport 1912nm User Manual

Adjusting the Settings

To configure the settings, click the Settings icon on the Net mode Home page.
The Settings module includes five tabs for configuring and adjusting the settings:
●
Slide Show Options: Sets up and customize a music and photograph slide show.
●
Network: Configures the monitor's network connection.
●
Date/Time: Sets the monitor's date and time.
●
Language: Selects a language for the monitor.
●
System: Returns all settings to their factory default values, sets the timer, updates the software,
locks the monitor, and enables or disables fast boot.
●
Password: Sets a password required to access the Settings module and unlock the monitor.

Slide Show Options

The Slide Show Options allow you to select photos that will be displayed during all music playback.
To configure a slide show of photos during all music playback:
1. Select the Slide Show Options tab in the Settings module.
2. In the Select Photos for Display during Music playback section, click the folder icon and
navigate to the folder with photos that you want to run as a slide show while playing music.
3. In the Slide Show Photo Settings section, select an effect of how the photographs transition
from one photograph to another in the slide show.
4. In the Slide Show Photo Settings section, select a time period to display each of the
photographs in the slide show.
5. Click the Apply button to save the configuration.
After the slide show is configured, the slide show of photos that you selected will run when you play
any music from the Music module (see
NOTE: If USB Hard Drive is selected for the Slide Show directory, the directory will change after
you switch off the monitor and switch it back on. The Slide Show directory stays the same if USB
thumb drive or SD card is selected.

Network Settings

The Network settings allow you to configure the network connection.
To configure the network settings:
1. Select the Network tab in the Settings module.
2. Click the Auto button in the Wizard section and follow the instructions on the screen, or click the
Manual button to enter the information manually then click the Apply button.
20 Chapter 3 Using the Net Mode Interface
Listening to Music on page 17).
ENWW