Download Print this page
HP PASSPORT 1912nm Disassembly Instructions Manual
HP PASSPORT 1912nm Disassembly Instructions Manual

HP PASSPORT 1912nm Disassembly Instructions Manual

18.5-inch internet monitor end-of-life disassembly
Hide thumbs Also See for PASSPORT 1912nm:

Advertisement

Quick Links

Product End-of-Life Disassembly Instr uctions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP passport 1912nm 18.5-inch Internet Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Power cord
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
4
0
2
0
0
0
0
1
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP PASSPORT 1912nm

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 Disassembly Flowchart for HP 1912nm Model Issue Date:Dec 21, 2012 Initiator: Cook Lau Photo Action Tool Lay the Monitor on the desk. Take out the base with finger Unlock 2 screws for VGA with screw #1 Bushing Screw Driver Driver.
  • Page 4 Take the LVDs out . Take the panel out from the back cover assy. Take the keypad out and unlocked the 11 screws which fixed the Power Board #2 Crossing Screw Driver & I/F board &Arm Board and chassis. separated the connect and baord. Separated the chassis from the back cover with the shark tool.
  • Page 5 Take the speakers out from the chassis with hand. Take the 4 pcs VESA Cap out from the chassis with hand. Unlock 2 screws from the hinge and #2 Crossing Screw Driver back cover,...
  • Page 6 Page : 1 of 4 Chimei Innolux Corporation No.3, Sec.1, Huansi Road, Tainan County, Southern Taiwan Science Park 74147, Taiwan Subject : Lamp Assembly Disassembly order Model : M185B1-L07 1. Separate the pcb protector film from the module PCB protector film 2.Remove 3 pcs screws.
  • Page 7 Page : 2 of 4 5.Remove wire fixing tape from lamp wire Wire fixing tape 6. Remove lamp wire from the housing. 7. Remove all hooks around the rear frame to separate housing. Housing No.: F00024290-Ver.2...
  • Page 8 Page : 3 of 4 8. Push up the upside film to remove film Films 9. Push up the side of LGP to remove LGP 10. Release the refector. from the rear frame. Reflector No.: F00024290-Ver.2...
  • Page 9 Page : 4 of 4 11. Disassemble the lamp ASS’Y Lamp Asssy. 12.Remove rubber cap from lamp Rubber cap 13. Remove lamp holder from metal rear Lamp holder No.: F00024290-Ver.2...