4.
Connect the upstream end of a USB cable to the USB In connector on the monitor's rear panel
and the downstream end to a USB Out connector on the PC.
NOTE:
the 4-in-1 media card reader on the monitor to function in PC mode.
Figure 2-11
5.
Connect one end of an audio cable to the Audio In connector on the monitor's rear panel and the
other end to an Audio Out connector on the PC.
NOTE:
function in PC mode.
Figure 2-12
10
Chapter 2 Setting Up the Monitor
This step is optional. However, the USB cable is required for the USB Out ports and
Connecting a USB Cable
This step is optional. However, the audio cable is required for the monitor's speakers to
Connecting an Audio Cable
ENWW