Epson STYLUS CX3500 Service Manual page 92

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600
Occurrence
timing Detailed phenomenon
CR position
• Operation
The drive of the PF Motor is not
transmitted to the LD Roller Shaft.
• –
TROUBLESHOOTING
Table 3-12. Check point for the paper out error according to each phenomenon
Defective
unit/part name
1. Check if the Extension Spring 0.143 does not come off in
the Clutch mechanism.
2. Check if the Clutch does not come off from the dowel of
the LD Roller Shaft.
Holder Shaft Unit
3. Check if the Clutch tooth is not damaged.
4. Check if the Clutch is not damaged.
Troubleshooting
Check point
Extension Spring 0.143
Clutch tooth
Dowel
Revision A
Remedy
1. Reassemble the Extension Spring 0.143 in the
Clutch mechanism.
2. Reassemble the round portion of the Clutch
on the dowel of the LD Roller Shaft.
3. Replace the Holder Shaft Unit with a new
one.
4. Replace the Holder Shaft Unit with a new
one.
92