EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600
V External View (2)
Dowels
2
1
3
C.B.P 2.5x8 F/Zn
Print Head
(3±1kgfcm)
Figure 4-17. Print Head Removal (2)
DISASSEMBLY AND ASSEMBLY
5.
Remove the screws (x3,
by using a long-nose plier.
C A U T I O N
Connectors
Print Head FFC
6.
Disconnect Head FFCs (x2) from connectors (x2) of Print Head, and then
remove Print Head.
A D J U S T M E N T
R E Q U I R E D
Disassembly
) for securing Print Head, and then lift Print Head
Use caution not to touch or damage the nozzles or the ink supply
needles of Print Head.
T
Align the positioning holes (x2) of Print Head with the dowels
(x2,
) of Carriage Unit.
T
Tighten the screws in order shown by figure.
Insert Head FFC firmly into the connector of Print Head.
When having removed or replaced Print Head, implement the
adjustment in the following order. (Refer to Chapter 5
"ADJUSTMENT")
1.
PG Adjustment
2.
Ink charge (for replacement only)
3.
Input Head ID (for replacement only)
4.
Head angular adjustment
5.
Bi-D adjustment
6.
PW adjustment
7.
First dot adjustment
Revision A
129