Epson STYLUS CX3500 Service Manual page 87

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600
Occurrence
timing Detailed phenomenon
CR position
The SPC does not perform the initial ink
• Power on
charge and an error is indicated with
• Inside HP
LEDs and STM3.
The SPC does not perform the ink
replacement CL and an error is indicated
with LEDs and STM3.
• Power on
• Anywhere
The SPC does not perform the printing
operation and an error is indicated with
LEDs and STM3.
TROUBLESHOOTING
Table 3-5. Check point for the error before the initial ink charge according to each phenomenon
Defective
unit/part name
Ink Cartridge
Main Board
Ink Cartridge
Ink Cartridge
Check point
1. Check if the Ink Cartridge can be used by installing it to
other SPC.
1. Check if an incorrect data is not stored into the address of
the EEPROM on the Main Board.
1. Check if the Ink Cartridge can be used by installing it to
other SPC.
1. Check if the ink is remaining in the Ink Cartridge.
2. Check if the Ink Cartridge can be used by installing it to
other SPC.
Troubleshooting
Revision A
Remedy
1. Replace the Ink Cartridge with a brand-new
one.
1. Set the proper destination by using
Adjustment Program.
1. Replace the Ink Cartridge with a brand-new
one.
1. Replace the Ink Cartridge with a brand-new
one.
2. Replace the Ink Cartridge with a brand-new
one.
87