General (Main Unit) - Panasonic CQ-D1703W Operating Instructions Manual

E

General (Main Unit)

N
G
L
I
S [VOLUME]
H
Remote control
9
[MUTE] sensor
[SQ] (Sound Quality)
[DISP] (Display)
(CLOCK)
Power
Set your car's ignition switch to the ACC or ON position.
Press [SRC/PWR].
ON:
OFF: Press and hold [SRC/PWR] for more than 1 sec-
ond.
Clock Display (at Power Off)
When the power of the unit is set to OFF, press [DISP]
(CLOCK).
When the power is set to ON, refer to the description for
each source mode.
Volume
Down Up
Note:
¡ The volume level can be set independently for each
source. (For radio, one volume setting for AM, one vol-
ume setting for all FMs)
10
CQ-D1703W
CD Player mode display
(a Page 12)
[SRC/PWR] (Source/power)
(Clock time) (Default)
(Display off)
Default: 18
Setting range: 0 to 40
(a Page 17)
(SQ) indicator
Mute
ON : Press [MUTE].
OFF : Press [MUTE] again.
indicator
SQ (Sound Quality)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music
type.
Press [SQ] to select the sound type as follows:
(FLAT) flat frequency response:
does not emphasize any part. (Default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly
emphasizes treble.
Note:
¡ If no operation takes place for more than 5 seconds in
the SQ mode, the display returns to the regular mode.
¡ Settings of SQ, bass/treble and volume are influenced
one another. If such an influence causes distortion to
the audio signal, readjust bass/treble or volume.
(a Page 28)
(AUX 1 in)
AUX 1
From line output of external
sound/audio device (ex.
Silicon-audio player, HDD play-
er, etc.)