Preparation; Remote Control Unit; Cq-C3503N; Main Unit - Panasonic CQ-C3303N Operating Instructions Manual

Preparation

Preparation Before Initial Use
Pull the insulation film out from the
backside of remote control gently.
Battery Replacement
q
Remove the battery holder with the
remote control unit placed on a flat
surface.
q
Stick your thumbnail into the
groove, and push the holder in the
direction of the arrow, and at the
same time.
w
Pull it out in the direction of the
arrow using a tough pointed object.
w
Put a battery in the case with (+) side
facing up.
e
Put the case back.

ACC Setting

Caution
¡Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure to
do this could cause the battery to go dead.
For an ACC-equipped car, select ON.
following functions are available. (Default: off)
¡The power is turned on automatically when inserting a
disc.
¡The clock can be displayed even if the power is off.
(a Page 8)
ACC not equipped
:
(Default)
ACC equipped
:

Remote Control Unit

Tough pointed
object
Back side

Main Unit

(a Page 30) The

CQ-C3503N

Warning
¡Keep a battery away from children to avoid the risk of
accidents. If an infant ingests a battery, please seek
immediate medical attention.
Caution
¡ Remove and dispose of an old battery immediately.
¡ Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡ Follow local regulations when disposing of a battery.
¡ Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:
¡Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal use
(at room temperature)
CQ-C3503N/C3303N
E
N
G
L
I
S
H
6
7