Panasonic CQ-D1703W Operating Instructions Manual page 33

e
Select each item.
Press one of the numeric buttons from [1] to [4].
(Example: "2. Pan & Scan (4:3)")
<TV Display Mode>
Select TV
Display Mode
1. NTSC The unit transmits the NTSC formatted signal in either case, playing an NTSC formatted video or a
PAL formatted video.
The unit transmits the PAL formatted signal in either case, playing an NTSC formatted video or a
2. PAL
PAL formatted video.
3. Multi The unit transmits the same video signal as the output of playing video software.
Note:
¡If the connected monitor cannot automatically select between NTSC and PAL according to the
video signal of the disc to be reproduced, images on the screen may be distorted. Select NTSC
or PAL at the monitor side depending to the disc to be reproduced.
4. Return The display returns to "Setup Menu".
1. WIDE (16:9)
2. Pan & Scan (4:3)
3. Letterbox (4:3)
4. Return
Note:
¡If "Pan & Scan" or "Letterbox" is already set in the software, this setting is ignored.
When power is turned on, On-Screen Display message such as "Play" and "Pause"
1. ON
will be displayed on the screen for 5 seconds.
When power is turned on, On-Screen Display messages such as "Play" and
2. OFF
"Pause" will not be displayed on the screen.
The display returns to "Setup Menu".
3. Return
Most compressed mode: TV
1. Minimum
broadcasts ,etc
2. Standard Mode recommended by software
creators for listening at low volumes.
Does not compress the dynamic
3. OFF
range.
4. Return The display returns to "Setup Menu".
To return to the "Setup Menu" display, press
1. WIDE (16:9)
2. Pan & Scan (4:3)
3. Letterbox (4:3)
4. Return
Plays in Wide mode when a wide-screen monitor is connected.
Plays in Pan & Scan mode when a conventional monitor is connected.
Plays in Letterbox mode when a conventional monitor is connected.
The display returns to "Setup Menu".
[RET] (RETURN).
r
Finish the setting.
Press [0] (Exit). (The setting is completed.)
Note:
¡To apply changes to the setting, be sure to
press [0] (Exit) at the end.
¡After the user settings have been changed and
entered, the player returns to the start of the
disc.
¡When the disc has predetermined language or
other settings, the user settings are not
reflected.
Note:
¡ When it is difficult to hear comparatively small
sound (such as movie dialogue), setting "Minimum"
will make those sounds easier to hear.
CQ-D1703W
E E
N N
G G
L L
I I
S S
H H
32 1
33