Sony Cyber-shot DSC-T110 Instruction Manual page 151

Eye-Fi
Sets whether to use the upload function of an Eye-Fi card (commercially available), when you
use the Eye-Fi card with this camera. [Eye-Fi] is displayed only when the Eye-Fi card is inserted
in the camera.
1
t (Settings) t
t [Eye-Fi] t desired mode
On
Off
Notes
• As of December 2010, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the
European Union.
• For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
• Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be
held liable due to local restrictions.
• The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is
prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-Fi] to [Off]. When
the uploading function of the Eye-Fi card is set to [Off],
Transferring image data using the Eye-Fi card
1 Set the wireless LAN access point settings or the transferring direction
settings of the Eye-Fi card.
For details, refer to the operating instructions supplied with the Eye-Fi card.
2 After the settings are finished, insert the Eye-Fi card into the camera, and
shoot the images.
The recorded images are automatically transferred via the wireless LAN to the PC, etc.
(Main Settings)
Uses the upload function.
The Eye-Fi mode display icon on the LCD screen will change
depending on the communication mode of the Eye-Fi card.
Eye-Fi card is in standby mode. There is no image to be sent.
Eye-Fi card is in upload standby mode.
Eye-Fi card is in connecting mode.
Eye-Fi card is uploading images.
An error has occurred.
Does not use the upload function.
is displayed on the LCD screen.
117 GB
Continued r