Sony Cyber-shot DSC-T110 Instruction Manual page 116

Receiving images using TransferJet
1 Press the
(Playback) button to turn on the camera.
2 Closely align the
device to receive images.
A notification sound is emitted when connection is made.
Notes
• Only images that can be played back on the camera can be sent or received.
• If an Image Database File error occurs during saving, a Recover Image Database File screen will appear.
• Play images that cannot be registered in the Image Database File using [Folder view (Still)].
z Tips for sending and receiving data successfully
Closely align the
z Using separately sold TransferJet-compatible
devices
Using separately sold TransferJet-compatible devices allows you to transfer images to a PC
and can broaden your enjoyment of transferring data.
For details, see the operating instructions supplied with your TransferJet-compatible device.
• Note the following points when using TransferJet-compatible devices.
– Before use, set the camera to playback mode.
– If an image does not display, select
[LUN Setting] to [Single].
– While connected, data cannot be written to or deleted from the camera.
– Do not disconnect while importing images to "PMB".
(TransferJet) marks on the camera and sending
(TransferJet) mark on the camera and other device.
• The transfer rate and range differ depending on the angle at which the
(TransferJet) marks are aligned.
• It may be necessary to alter the position/angle of the camera until
communication can be obtained.
• Sending and receiving data is easier if the
aligned with both cameras parallel to each other as shown in the figure.
t
(TransferJet) marks are
(Settings) t (Main Settings) and then set
82 GB