Sony Cyber-shot DSC-T110 Instruction Manual page 120

Protect
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1 Press the
(Playback) button to switch to
playback mode.
2 t (Protect) t desired mode
(This Image)
(Multiple
Images)
(Set All on This
Date)
(Set All in This
Folder)
(Remove All on
This Date)
(Remove All in
This Folder)
Note
• When using internal memory, a Folder View is used with still images and movies displayed in the same
folder.
Protects the currently displayed image in single-image mode.
You can select and protect multiple images.
After step 2, perform the following.
1Select an image to be protected, then touch it.
Repeat the above steps until there are no more images to be
protected.
Touch an image with a
2Touch [OK] t [OK].
Protects all images in the date range or folder.
Touch [OK] after step 2.
Unlocks all images in the date range or folder.
Touch [OK] after step 2.
mark again to release the mark.
86 GB