Paper Jams - Brother DCP-8070D User Manual

Paper jams

To clear paper jams, please follow the steps
in this section.
IMPORTANT
• Please confirm that you have installed
both a toner cartridge and a drum unit in
the machine. If you have not installed a
drum unit or have installed the drum unit
incorrectly, then this may cause a paper
jam in your Brother machine.
• To prevent damage to the machine
caused by static electricity, DO NOT touch
the electrodes shown in the illustration.
Note
• If the error message remains, open and
close the front cover and fuser cover firmly
to reset the machine.
• The LCD names for the paper trays are as
follows:
• Standard paper tray: Tray 1
• Multi-purpose tray: MP Tray
Troubleshooting and routine maintenance
Paper is jammed in the MP tray
C
If the LCD shows Jam MP Tray, follow
these steps:
a
Remove the paper from the MP tray.
b
Remove any jammed paper from in and
around the MP tray.
c
Press Start.
d
Fan the paper stack, and then put it back
in the MP tray.
e
When loading paper in the MP tray,
make sure that the paper stays under
the maximum paper height guides on
both sides of the tray.
C
C
71