Synology DiskStation User Manual page 31

Article Location
Name
Power Front
Button Panel
LED Front
Indicators Panel
Hard Drive Front
Tray Panel
Back
USB Port
Panel
Back
Fan
Panel
Back
eSATA Port
Panel
RESET Back
Button Panel
Back
LAN Port
Panel
Back
Console Port
Panel
Back
Power Port
Panel
Getting to know your Synology DiskStation
The Power Button is used to turn Synology DiskStation
on or off.
To turn off Synology DiskStation, press the Power Button
and hold it until you hear a "beep" sound and the Power
LED starts blinking. The shutdown process will complete
in 30 seconds.
The LED indicator is used to display the status of the
internal disk and the system. For more detail please
refer to the following LED Indication Table.
The hard drive tray is designed for loading the hard
drives used in Synology DiskStation.
The Synology DiskStation offers USB ports for adding
additional external hard drives, USB printers, or other
USB devices.
The fan is built to exhaust waste heat out of Synology
DiskStation. It will start automatically when the server
starts. If the fan is malfunctioning, system will "beep"
every 1 second.
The eSATA port is for connecting with an external SATA
HDD.
1. To restore IP, DNS, passwords for the admin account
to default value.
2. To reinstall the Synology DiskStation.
The LAN port is where you connect RJ-45 cable to
Synology DiskStation.
The console port is where you connect Synology
DiskStation directly to a computer.
The power port is where you connect the AC adapter to
Synology DiskStation.
Description
31