Synology DS410j Quick Installation Manual
Disk station
Hide thumbs
Also See for DS410j:
- Brochure & specs (2 pages) ,
- User manual (71 pages) ,
- Quick installation manual (13 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Synology DS410j
Summary of Contents for Synology DS410j
- Page 1 Quick Installation Guide Document ID: Synology_QIG_DS410j_20090901...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Please read these safety instructions carefully before use, and keep this manual in a safe place for your future reference. Keep away from Keep Synology Do not place the direct sunlight and product upright. Do Synology product away from not lay it down close to any liquid. -
Page 3: Package Contents
PACKAGE CONTENTS Before you begin, please check the package contents to verify that you have received the items below. Main Unit X 1 (4 hard disk trays Installation CD AC power adapter included) 2M RJ-45 LAN AC power cord cable Assembling Kit Screws for Screws for... -
Page 4: Installing Hard Disks
INSTALLING HARD DISKS Disk Station requires at least one 3.5” or 2.5” SATA hard disk for installation. Refer to the following steps for details: Warning! If you use a hard disk with data on it to install, system will format the hard disk and erase all data in some cases. Please back up the data if you need it in the future. - Page 5 You will see four hard disk trays. Pull one hard disk tray out. a. If you are using 3.5” hard disks, place the hard disk into the hard disk tray. Secure the hard disk on the two sides with the 4 screws (for securing 3.5”...
- Page 6 Put the hard disk tray back in the Disk Station and repeat step 4 for each hard disk. Make sure the hard disk trays are pushed all the way to the back. If you are using 3.5” hard disks, secure the hard disk trays with the screws (for securing hard disk trays) provided.
- Page 7 Place the upper case back to its position.
- Page 8 Attach the cable lock to the corresponding hole above the power port on the back cover. Make sure the cable lock is hooked on the inner side of the back cover. Close the back cover and fix it with the four screws.
- Page 9 TURN ON SERVER Connect the AC adapter to the power port, and fix the cable to the cable lock. Then plug the power cord into a power socket. Connect the RJ-45 cable to the server and connect the other end to your switch/hub/router. Remove the plastic wraps on the front panel.
- Page 10 INSTALL SYSTEM SOFTWARE Windows User Insert the installation CD to your computer. Choose Set up the Synology Server on the autorun menu. Click Browse to select the “.pat” installation file in the installation CD. Follow the on-screen instructions to complete the setup...
- Page 11 Double click on the CD-Rom Drive thumbnail. Double click MacOSX. Double click SYNOLOGY-Assistant.dmg. Double click on the automatically generated thumbnail SYNOLOGY-Assistant.dmg on the desktop. Double click Synology Assistant to run the Setup Wizard.
- Page 12 Click Browse to select the “.pat” installation file in the installation CD. Follow the on-screen instructions to complete the setup process. Note: If you choose One-Click Setup, the admin password will be blank.
- Page 13 CONGRATULATIONS! Server has been set up. Refer to the User’s Guide in the installation CD for advanced settings and management. For more information or online resources, please visit http://www.synology.com.