Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hoover Vacuum Cleaners
Summary of Contents for Hoover Vacuum Cleaners
- Page 2 The HOOVER vacuum cleaner you have just purchased is a combina- tion cleaner. It has a motorized power nozzle for carpet and floor cleaning and has cleaning tools for above the floor cleaning. Your cleaner is a model no. and has a serial number For your personal records, please enter the model number and serial number in the spaces provided above and retain in a safe place.
-
Page 3: Important Safeguards
Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time. Keep hands, feet, loose clothing, and hair away from rotating agitator. - Page 4 Unpacking Unpack the cleaner from the carton and identify the parts shown below. Remove and dis- pose of the cardboard packing. A. Canister cleaner B. Power nozzle C. Throw away bag D. Extension wands, cleaning tools and hose. The cleaner assembled will look like the drawing below.
- Page 5 Power Nozzle automatically adjusts to different carpet pile heights. : 2. Casters provide easy towing; pull cleaner using hose to guide the cleaner over carpet, area rugs and door sills. Hose Connection to Cleaner is made by plugging hose cord into Cord cleaner base at receptacle.
-
Page 6: How To Assemble
1. Connect hose To connect hose, insert hose into opening of cleaner lining up the arrow on the hose with the dot on the cleaner. Turn the hose clockwise until the arrow lines up with the bar on the cleaner and latch locks into place. -
Page 7: Position Tools
Attach the curved wand to the straight wand. Position cord into cord clips on extension wands, placing excess cord between nozzle and bottom cord clip. To attach the hose to the exten- sion wands, rotate the plastic latch ring on the handle to accept the button projection on the curved wand. -
Page 8: How To Use
Power Nozzle Handle adjustment The handle has two positions when used with the power noz- zle: Upright and Operating. To lower handle to the Operating position, place your foot on the power nozzle and push the han- dle down. Automatic nozzle adjustment The power nozzle adjusts auto- matically to effectively clean hard... -
Page 9: Cleaning Tools
Cleaning Tools The cleaning tools have many uses. Select the tool best suited for the cleaning task from the descriptions below. Adjust the Suction Regulator to select the amount of suction appropriate to the cleaning task. 1. Crevice tool for radiators, dresser drawers, spaces between kitchen appliances. -
Page 10: Power Cord
Power cord . ’ To avoid damage to the power cord, leave it connected to the receptacle on the cleaner at all times. To clean hard to reach areas The tools attached to the curved wand, as shown, will enable you to clean many hard to reach areas;... -
Page 11: Maintenance
Where to buy bags Bags may be purchased from your ocal Authorized Hoover Dealer or from a Hoover Factory Service Center. When ordering bags, be sure to give the model number of your cleaner. Your cleaner can be stored on end as shown in the illustration. - Page 12 Use HOOVER bag type H with this cleaner. To assure that your HOOVER cleaner operates at peak performance, it is imperative that you use only genuine HOOVER throw away bags made by The Hoover Company. HOOVER bags can be identified by the trademarks - -...
-
Page 13: Clearing Obstructions
Note: A bag that does not expand properly may restrict air flow. In this event, check the bag, making sure all the folds are open. High suction on some carpet surfaces can cause the nozzle to hug the carpet and also restrict air flow, When this occurs, reducing the suction with the Suction Regulator may be helpful. - Page 14 There are other belts manufactured that are similar in shape and size but are not designed for the HOOVER power nozzle. Such belts do not operate the agitator correctly and may create stress which could damage your power nozzle.
-
Page 15: How To Replace The Belt
How to replace the belt Disconnect cleaner from elec- trical outlet and disconnect power nozzle from extension wands. Turn nozzle over and unscrew the 2 Phillips head screws from the nozzle base. Return nozzle to original position and lift up back of nozzle cover. Then remove cover, rotating it for- ward and lifting it off. - Page 16 Position round projection on end of agitator (opposite the belt) into the opening in the wall of the nozzle base. The cover attaches at the front of the nozzle. Place the notched edge at the front of the cover into the groove in the nozzle base.
- Page 17 If brushes do not touch edge of card, all four brushes and brush roll should be replaced to maintain cleaning effectiveness. When replacing agitator brushes, ask for HOOVER part No. 48445017. How to replace agitator brushes Disconnect cleaner from electri- cal outlet and disconnect power nozzle from extension wands.
- Page 18 Therefore, do not add lubricant to either motor bearing. The agitator is equipped with two ball bearings that should be lubricated periodically. This should be done by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer. END SECTION...
-
Page 19: If You Have A Problem
HOOVER service and genuine HOOVER replacement parts may be obtained. The warranty provided with this product has a listing of the Hoover Factory Service Centers. If you are unable to obtain the in- formation you need from the Yellow Pages, contact a Hoover Factory Service Center to find your nearest Authorized Warranty Service Dealer. - Page 20 Store machine carefully rn a dry area. For optimum cleanrng performance and safety, study and follow your Owner’s Manual keep It rn a handy and safe place for future reference. THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 Rl 9 - 8 3 S3193,S3217 Litho USA 56513-134...