Page 1
Manual Operating and Servicing Instructions Español - página E1 www.hoover.com IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE. Questions or concerns? For assistance, please call Customer Service at 1-800-944-9200 Mon-Fri 8am-7pm EST before returning this product to the store. THIS PRODUCT IS INTENDED FOR COMMERCIAL USE ONLY.
Service ........................17 If you need assistance: Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® autho- rized dealer locations (U.S. only) or to speak with a customer service representative; Mon- Fri...
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: • Fully assemble before operating. •...
Page 4
• Make sure your extension cord is in good condition and is the correct size for your appliance. Table (A) shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
Page 5
GroundinG instruCtions (Cont’d) DANGER ‑ Improper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
1. Cleaner asseMBlY Carton Contents A. Handle Assembly B. Nozzle Assembly C. Wand with Handle Grip and Hose D. Cleaner Body E. Extension Cord F. Instruction manual Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing materials.
1. Cleaner asseMBlY (Cont’d) attaCh handle 1.6 Lift the handle lock button up and place the handle assembly down into the opening on top of the bag housing as far as it will go. 1.7 When the handle assembly has been pushed down as far as it can go, press the handle lock back down.
When the red indicator light above the bag full/clog icon illuminates, the bag needs to be checked. See mainte- nance section on how to service the bag (page 11-12). Motor error: If all three indicator lights illuminate and stay solid, there is a motor error. Contact your local authorized Hoover service representative. sYsteM error: If all three indicator lights illuminate and are flashing, there is a system error.
on-oFF switCh transportinG Cleaner 2.3 Plug cord into electri- 2.4 To move your cleaner cal outlet. LED lights will from room to room, put flash on and then off. handle upright position, tilt cleaner back To turn cleaner ON, push on rear wheels and push ON/OFF switch to “...
Carpet heiGht adjustMent (Cont’d) For Models with autoMatiC heiGht adjustMent 2.10 The brushroll automatically adjusts for any carpet 2.10 or hard surface. The DUAL wheel stabilizing system, located on the underside of the nozzle, adjusts the brushroll up and down in order to reach the optimal setting for the desired floor/carpet type.
Buy: Filter Bag illuminates, the following should be checked: Use only genuine Hoover bags with your vacuum. When purchasing a new bag, ask for Hoover • If the filter bag is full; change the filter bag.
Buy 4.7 Insert the new filter by lifting the metal safety lever Use only genuine Hoover Secondary Filters with your (A) and sliding the new filter in until it is securely in vacuum. When purchasing a new Secondary Filter, place.
Final Filter: how to replace what to Buy WARNING Use only genuine Hoover Final Filters with your vacuum. When purchasing a new Final Filter, ask for Hoover Part No.440001914. To reduce the risk of personal injury, unplug before cleaning or servicing. Do not use vacuum without either the secondary or final filter in place.
resettinG led indiCator liGht 4.17 4.17 When it is time to change the Brushroll or change the Secondary Filter, the indicator light above those particular icons will illuminate and stay on (solid). Once the Brushroll or Secondary Filter has been replaced, the indicator light will need to be manually reset.
ClearinG BloCKaGes WARNING To reduce the risk of personal injury, unplug before cleaning or servicing. Low suction or pick up may be due to a blockage in 4.18 the system. Refer to the following steps to check for blockages, continuing with each step until the blockage is found: 4.18 Check fullness of filter bag a.
Follow the service center link to find the service outlet nearest you. • For an automated referral of authorized service outlet locations call 1-800-944-9200. Do not send your vacuum to Hoover, Inc., Company in Glenwillow for service. This will only result in delay. If you need further assistance: To speak with a customer service representative call 1-800-944-9200;...