Cleaning Tools; Tool Suction Regulator; How To Use; Connect Hose - Hoover Dial-A-Matic U6049 Owner's Manual

Cleaner with automatic powerdrive
Table of Contents

Advertisement

1. Vinyl hose
Hose has vinyl jacket for long,
trouble-free life. The light flexible hose has a
vinyl tab, so it can be hung on the cleaner. A
suction regulator is located on the hose grip.
2. Extension wand
Use to give extra length when
cleaning stairs or above the floor, hard to reach
areas.
3. Upholstery brush
draperies, tapestries, mattresses, clothing, auto-
mobile interiors and carpeted stairs.
Crevice tool
4.
For upholstered furniture, edges
of wall-to-wall carpeting that are inaccessible
with cleaner, radiators, dresser drawers.

HOW TO USE

Handle must be in the Storage Position when
using tools.

1. Connect hose

Set the indicator on the dial at MAX position
under CARPET SUCTION. Insert hose connector
on hose in opening below dial, and turn the hose
connector in a clockwise direction until it locks
into place.
Set the suction regulator on the cleaner to
MAXIMUM TOOL SUCTION.
2. Adjust suction
A second suction regulator* is located on the
hose grip and it adjusts the amount of suction
when using the attachments.
MAXIMUM
or
suction by rotating the plastic ring
until the raised plastic indicator on the dial is
directly under the desired setting.
*Some models only. If your cleaning tool set does
not have a suction regulator on the hose grip, ad-
just the suction by setting the regulator on the
cleaner.

3. Attach tools

a. To hose grip
Attach a tool or the wand (for
length) directly to the hose grip by rotating the
plastic latch ring on the hose grip to accept the
button projection on the end of the tool or
wand. Turn the latch ring clockwise to lock in
place.
remove, reverse the above procedure.
To
For upholstered furniture,
MINIMUM, MEDIUM,
6

Advertisement

Table of Contents
loading

Table of Contents