Summary of Contents for Hoover TurboPower WindTunnel Series
Page 1
WindTunnel™ Uprights are America’s Best Clean-Air Uprights! Pick up more dirt than any other clean-air uprights! This WindTunnel™ vacuum cleaner takes HOOVER® Type “Y” Allergen Filtration filter bags This product was designed for easy assembly (see page 3) www.hoover.com...
It is suggested that you attach your sales receipt to this owner’s manual. Verifica- Example tion of date of purchase may be required for warranty service of your HOOVER product. Be sure to fill out and return the product registration card included with your cleaner.
1-800-944-9200 for an automated referral of service outlet locations (U.S. only) 1-330-499-9499 to speak with a representative in our Consumer Response Center Visit us on-line at www.hoover.com to find the service outlet nearest you (click on the "Service" button). Carton Contents Remove all parts from carton and Not required for assembly: identify each item shown.
Page 4
Reposition bag door by fitting tabs Place nuts in recessed areas on front Position cord on back of cleaner as on bottom of door into opening. of handle. Hold each nut in place shown and press cord into clip. Press top of door to snap securely while tightening each bolt securely shut.
2. How to use The assembled cleaner will look like one of the drawings. Cleaner description 1. Handle 11. Furniture guard: helps prevent Operate cleaner only at voltage 2. Cord hooks: wrap cord around cleaner from marking furniture. specified on data plate on bottom of hooks for storage.
Handle positions Transporting cleaner Carrying handle The handle of your cleaner has three The cleaner can also be moved by using To move your cleaner from room to room, positions; upright for storage and when the carrying handle. put handle in upright position, tilt cleaner using cleaning tools;...
2-11 2-12 2-13 Edge cleaning Stair cleaning Cleaning lightweight flexible rugs A stair cleaning handle has been de- Special edge groomers are provided on signed for ease in using your cleaner on both sides of the nozzle to remove dirt in Stand on one end of rug and move stairs.
Hold new filter bag as shown. Align It is imperative that you use only genuine opening in filter bag with (B). HOOVER filter bags made by The Hoover Push (A) firmly onto (B). Company to assure that your cleaner operates at peak performance. HOOVER Tuck in filter bag.
Hand wash filter in cold water with mild detergent, then air dry. Reposition dry filter and grill. Should you want to replace this filter, ask for HOOVER part No. 38765019. Check agitator shield Because your cleaner picks up so well, we strongly recommend you check for debris accumulation under the agitator shield each time you clean the filters.
Headlight replacement (some models only) What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313-101. Installing bulb Removing lens Replacing lens Disconnect cleaner from electrical Pull old bulb straight out of socket.
If the thermal protector continues to www.hoover.com activate after following the above steps, your cleaner may need servicing (see Do not send your cleaner to The Hoover Company in North Canton for service, "Service" section). this will only result in delay.
This warranty does not cover pick up remove any blockage. Problem: Cleaner hard to push delivery, or house calls; however, if you mail your appliance to a Hoover Factory Possible Cause Service Center for warranty service, transportation will be paid one way.
Protector térmico .........16 agua, llévelo al Centro de Servicio de Fábrica Hoover, o al Concesionario Autorizado Garantía..........17 de Servicio de Garantía de Hoover (Depósito).
Need help?
Do you have a question about the TurboPower WindTunnel Series and is the answer not in the manual?
Questions and answers