Alesis TWOTRACK Quick Start Manual page 6

Deleting a File
1. On the main screen, Press the [DELETE] button to request to delete the
current file.
2. Press the [REC] button to confirm the operation or press any other button to
cancel.
System Settings
1. In Sys_Setting menu, use the [BACK] or [FORWARD] buttons to select the
item, battery type or backlight time.
2. For the battery type, use the [PLAY] or [STOP] button to select Ni-MH or
ALKALI.
3. For the backlight adjustment, use the [PLAY] or [STOP] button to change
the backlight settings from
5 sec, 10 sec, 15 sec, 40 sec, 60 sec or always on. (Default: 60 sec)
Mic Volume
During recording and monitoring, use [MIC+] and [MIC-] to change the input
level. If the input level is too loud, the record indicator LED light will turn off
briefly to indicate a peak.
Auto Power Off
The TWOTRACK has an auto power standby mode. If no operation is given
within two minutes, it will turn off automatically to save power.
Reinitialization
To restore factory settings, power on the TWOTRACK while holding down the
[Volume -] button.
System Messages
NO FILE
LOW MEMORY
LOW BATTERY
DELETED
There is no file to select
The memory capacity to store recorded data is low.
Delete any unnecessary files or use another micro SD card
The battery is almost out of power
You have chosen to delete a file
6