Turning On The Power; Starting Up For The First Time - Toshiba TECRA A8 User Manual

Turning on the power

This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
section in Chapter 6, Power and Power-Up Modes.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
the first
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
1. Open the computer's LCD display panel.
2. Press and hold the computer's power button for two or three seconds.
Power button

Starting up for the first time

The Microsoft Windows Vista™ Startup Screen will be the first screen
displayed when you turn on the power. Follow the on-screen instructions on
each screen in order to properly install the operating system.
When it is displayed, be sure to read the
carefully.
User's Manual
time.
Turning on the power
Power indicators
Starting up for
Software License Terms
Getting Started
3-5