Toshiba TECRA A8 User Manual page 152

CD-ROM drive
Problem
You cannot access a
CD in the drive
Some CDs run
correctly, but others do
not
User's Manual
Procedure
Make sure the drive's disc tray is securely
closed. Press gently until it clicks into place.
Open the disc tray and make sure the CD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the disc tray could block laser
light from reading the CD/DVD. Make sure there
is no obstruction. Remove any foreign object.
Check whether the CD is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
Refer to the Media care
details on cleaning.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD's documentation.
Check the type of CD you are using. The drive
supports:
CD-ROM: CD-DA, CD-Text, Photo CD™
(single/multi-session),
CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2 (Form1,
Form2), Enhanced CD
(CD-EXTRA), Addressing
Method 2
Recordable CD: CD-R, CD-RW
Troubleshooting
section in Chapter 4 for
9-9