Usb Device - Toshiba TECRA A8 User Manual

USB device

Refer also to your USB device's documentation.
Problem
USB device does not
work
Bios Beep Sounds
Problem
Beep sounds
User's Manual
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Ensure that any required USB device drivers are
properly installed - to achieve this you should
refer to both the device documentation and the
operating system documentation.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in HW Setup is set to
If problems persist, contact your dealer.
Procedure
Beep volume can be set to High/Medium/Low/Off
using the Bios Setup Program. The Default is
Medium.
The volume for the loud beep sound that occurs
when there is a memory error cannot be
adjusted.
Troubleshooting
Enabled .
9-16