Usb Device - Toshiba C70-B User Manual

Problem
Double-clicking does
not work
The on-screen
pointer moves too
fast or too slow
The on-screen
pointer moves
erratically

USB device

In addition to the information in this section, also refer to the documentation
supplied with your USB device.
Problem
USB device does not
work
User's Manual
Procedure
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Control Panel ->
Hardware and Sound -> Mouse under
Windows System in the Apps view.
2. Within the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Control Panel ->
Hardware and Sound -> Mouse under
Windows System in the Apps view.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click
OK.
The elements of the mouse responsible for
detecting movement might be dirty. Refer to the
documentation supplied with the mouse for
instructions on how to clean it.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Procedure
Remove the USB device from the computer and
then reconnect it to a free port in order to ensure
that it is firmly attached.
Ensure that any required USB device drivers are
properly installed. To achieve this, refer to both the
device documentation and the operating system
documentation.
6-11