Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hoover Elite Supreme S1211
Summary of Contents for Hoover Elite Supreme S1211
- Page 1 EliteTM Sup Dual Purpose Vacuum Cleaner Review this manual before 0 erating c eaner...
- Page 2 DO NOT RETURN THIS PRODUCT TO THE STORE. Fill in and retain This vacuum cleaner is a combination cleaner. It is designed for carpet and rug cleaning and may be used with cleaning tools for other tasks. The model and serial number are located on the bottom of the cleaner.
-
Page 3: Important Safeguards
Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot). - Page 4 mbling cleaner s extremely importamt to read and if Uow a01 the instruction steps in order. Remove all parts from carton and identify each item shown. sure Make all parts, especially small items such as E, F, and I, are located before dispos- ing of cardboard packing.
- Page 5 LOWER HANDLE Place upper and lower handle sections on a flat surface with cord hooks on top. With hands on sides of handle sections, push sections together firmly until they “click” into place (Fig. 1). *Be careful not to press against the rod extending from the lower handle.
- Page 6 Rotate cord protector on cord until you see its arrow. (Fig. Pull cord tight. Press cord into place at each of the three notches indicated. (Fig. 7) Do not plug cleaner in until assembly is totally complete. ARROW&- CoRD p ROTECTOR ,---, With arrow on cord protector pointing toward arrow on upper...
- Page 7 Note location of tapered rails on bracket and on lower handle. (Fig. 8) RAILS RAILS With printed side of bracket facing up, slide rails on bracket onto rails on lower handle until tab. (Fig. 9) Make sure hole in bracket aligns with hole in handle.
- Page 8 Hook tool rack over left edge of ‘handle, matching arrows and letters. (Fig. 11) With cord hooks to the back, place assembled handle onto handle base of cleaner body. (Fig. 13) handle side to side Rock while down firmly. pushing Extra pushing effort may be required.
- Page 9 Place nut in recessed area at back of handle. Hold nut in place while tightening bolt securely with a screwdriver. (Fig. 15) Pull bag door latch forward and remove door. Set bag door aside: (Fig. 16) Note round opening and hooks on back of bag compartment.
- Page 10 Align opening in paper bag with dirt tube inside bag compart- ment. (Fig. 19) Push bag collar firmly onto dirt tube. (Fig. 20) Tuck top and bottom of bag into bag compartment. To replace bag door, insert the tabs on bottom of bag door into the slots on bag compartment.
- Page 11 (some models only) Insert hose connector into side of rack. (Fig. 23) ST--- Position wand in side of tool rack and snap into place. (Fig. 25) CAUTION: When cleaner is turned on, the agitator brush roll will continue to rotate while cleaner handle is in upright position. Avoid tipping cleaner or setting it on furniture, fringed area rugs or carpeted stairs during tool use.
- Page 12 The assembled cleaner will look like the drawing below. 1. Handle 2. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release. 3. Bag door latch 4. ON/OFF switch: located on side of handle.
-
Page 13: Handle Positions
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. - Page 14 Carpet hei adjustment The cleaning of carpet and rugs takes place at the nozzle. It is necessary to raise and lower the nozzle for various carpet pile heights by sliding the nozzle control knob to the correct setting. For ease in sliding knob, the handle should be in the upright position.
- Page 15 Daytime Phone & Area Code this form to order HOOVER disposable bags, belts, bulbs, spare tools and air freshener tablets directly from THE HOOVER COMPANY, NORTH CANTON, OHIO. These items will be shipped to your home freight prepaid. They may also be purchased from your local Hoover dealer or Hoover Factory Service Center.
-
Page 17: Edge Cleaning
Gleaming lightweight flexible rugs Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) and will prevent rug from clinging to cleaner. - Page 18 Autho- rized Hoover Dealer (Depot), a Hoover Factory Service Center or by writing to The Hoover Company, North Canton, Ohio 44720 The tool set includes a hose, wand, crevice tool, furniture nozzle and dusting brush.
-
Page 19: How To Clean Tools
If no obstruc- tion is found, check hose and tools. Remove obstruction. To continue using tools, re-attach hose to cleaner. If no obstruction is found and a problem persists, contact your Hoover Factory Service Center or an Authorized Warranty Service Dealer (Depot). - Page 20 For improved cleaning effectiveness and superior filtration, use Genuine HOOVER@ Micro Filtration Type A disposable bags with your cleaner. Regular HOOVER@ Type A disposable bags also fit your cleaner and will provide satisfactory performance. To assure that your cleaner operates at peak...
- Page 21 Close door. The headlight What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover part No. 27313-I OS- How to replace Disconnect cleaner from electri- cal outlet. 1. Remove nozzle control knob on front of hood by grasping knob and pulling up.
- Page 22 2. Place handle in operating position and turn cleaner over. Insert end of flat screwdriver into one of the four slots beside an arrow on bottom of cleaner. 3. For slots nearest the rear wheels, push handle of screwdriver toward cleaner handle; for remain- ing two slots, pry outward to release latches.
- Page 23 The belt on your HOOVER cleaner causes the agitator to rotate and is important for the effective operation of the cleaner. The belt is located under the bottom plate of the cleaner and should be checked from time to time to be sure it is in good condition.
- Page 24 4. If belt is not broken, pull it off the motor pulley. 5. Return cleaner to bottom side up. Remove agitator and belt. 6. Slip agitator through new belt (with lettering toward outside of cleaner) and position belt in belt guide.
- Page 25 What to buy The agitator may be replaced with either a single or double row of brushes. Single row of brushes - Hoover part No. 48414-051- Double row of brushes -Hoover part No. 48414-049. How to replace Disconnect cleaner from electri- cal outlet.
- Page 26 The addition of lubricant could cause damage. Do not add lubricant to motor bearings. The agitator is equipped with two ball bearings that should be lubricated periodically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer (Depot). Possible solution I.
- Page 27 (a) the geometric mean of the amount of embedded carpet dirt removed in testing under ASTM Test Method F608-89, by (b) the value 29 (the geometric mean of the midpoints of the % dirt pickup scales selected by Hoover as a reference for its rating system). contact The Hoover Company complete...
- Page 28 2. Hoover Authorized Warranty Service Dealers (Depot). This warranty does not cover pick up, delivery, or house calls; however, if you mail your appliance to a Hoover Factory Service Center for warranty service, transportation will be paid one way. While this warranty gives you specific legal rights, you may also have other rights which vary from state to state (or province).
- Page 30 0 (I are registered trademarks Hoover and THE HOOVER COMPANY, NORTH CANTON, OHIO 44720 5651 l-396 Litho USA R6 3-95 MO35930/43-930/ 71-930/75-930...