Carpet hei
adjustment
The cleaning of carpet and rugs
takes place at the nozzle.
It is necessary to raise and lower
the nozzle for various carpet pile
heights by sliding the nozzle
control knob to the correct setting.
For ease in sliding knob, the handle
should be in the upright position.
The nozzle will not move Into the
adjusted position until the
cleaner handle is lowered to the
operating position.
are recommended. (4
BARE FLOOR
Cleaners with two settings:
Lowest setting (A):
l
Cleaners with Four settings:
Lowest setting (1):
l
Next set-tins (2):
l
Note: If the cleaner is difficult to push, slide the knob to the next higher
setting.
13
for ,bare floors and all types of carpet.
if easier pushing is desired while maintaining
good cleaning performance.
for bare floors and low pile, level loop, kitchen
type carpet.
for other types of carpet.
good c eaning performance.
NOZZLE
HIGH