Front Panel - Onkyo TX-NR636 Basic Manual

1 2 3
(European, Australian
and Asian models)
M N O

Front Panel

zON/STANDBY button: Turns the unit on or into
1
standby mode.
BLUETOOTH indicator: Flashes while pairing with a
2
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
Wi-Fi indicator: Lights when the unit is connected to
3
the wireless LAN router.
ZONE 2 button: Controls the ZONE function.
4
Remote control sensor: Receives signals from the
5
remote controller.
OFF button: Switches the ZONE function to off.
6
Display
7
LISTENING MODE buttons: Allows you to select the
8
listening mode.
DIMMER button (North American and Taiwanese
9
models): Switches the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
4 5 6 7
P
MEMORY button: Registers or deletes a station.
F
TUNING MODE button: Switches the tuning mode.
G
DISPLAY button: Switches the information on the
H
display.
HOME button: Displays the Home menu.
I
Cursor buttons, l TUNING j button,
J
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with l TUNING j or
select the registered station with
RETURN button: Returns the display to the previous
K
state.
MASTER VOLUME: Allows you to adjust the volume.
L
MUSIC OPTIMIZER button and indicator (North
M
American and Taiwanese models): Turns on/off the
MUSIC OPTIMIZER function that improves the quality of
the compressed audio.
PURE AUDIO button and indicator (European,
Australian and Asian models): Switches to the PURE
AUDIO mode.
8 9 F G H
(European, Australian
and Asian models)
Q
d c
PRESET
d c
PRESET .
I J K
R
PHONES jack: Stereo headphones with a standard plug
N
are connected.
AUX INPUT HDMI/MHL jacks: An HD video camera or
O
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
TONE and Tone Level buttons: Adjusts the high tone
P
and low tone.
Input selector buttons: Switches the input to be
Q
played.
USB port: A USB storage device is connected so that
R
music files stored in it can be played.
SETUP MIC jack: The supplied speaker setup
S
microphone is connected.
HYBRID STANDBY indicator: Lights if the unit enters
T
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
L
S T
15