Connecting And Playing The Bluetooth-Enabled Device; Using The Home Menu; Pairing; Playing Sound Of The Bluetooth-Enabled Device - Onkyo TX-NR636 Basic Manual

3
Connecting and playing the Bluetooth-
enabled device
You can wirelessly enjoy music files stored in a smartphone
or other Bluetooth-enabled device. The coverage area is 48
feet (15 meters).
• The Bluetooth-enabled device needs to support the
A2DP profile.
• Note that connection is not always guaranteed with all
Bluetooth-enabled devices.

Pairing

Pairing is necessary when using the Bluetooth-enabled
device for the first time. Before starting the procedure, learn
how to enable the Bluetooth setting function and to connect
with other devices on the Bluetooth-enabled device.
1.
Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH
indicator starts flashing.
2.
While the BLUETOOTH indicator is flashing,
complete connection on the Bluetooth-enabled
device in the nearby area within about 2 minutes.
If the name of this unit is displayed on the Bluetooth-
enabled device's display, select this unit. Paring will end
after a short time.
• If a password is requested, enter "0000".
• When connecting the unit to any other Bluetooth-
enabled device, start pairing by pressing and holding
BLUETOOTH until the BLUETOOTH indicator starts
flashing. This unit can store the data of up to ten paired
devices.
12

Playing sound of the Bluetooth-enabled device

If the unit is on and the Bluetooth-enabled device is
connected, the input will be automatically switched to
BLUETOOTH. Play music in this state.
• It may take about a minute until connection is established
when the unit is on since the Bluetooth function takes
some time to start up.
• If the volume setting on the Bluetooth-enabled device is
low, the sound will not be output from this unit.
• Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the Bluetooth-enabled
device.
4

Using the Home menu

In the Home menu, you can make advanced settings and
use Internet radio and DLNA.
1.
After pressing RCV, press HOME on the remote
controller.
The Home menu is displayed on the TV screen. You can
also use the HOME button on the main unit.
HOME
Setup
2.
Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
• For details on the Setup menu and how to play
Internet radio, DLNA and USB storage device, see
the Advanced Manual (http://www.onkyo.com/manual/
txnr636/adv/en.html).
• To return to the previous screen, press RETURN. To
return to the Home menu, press HOME.
 Sleep Timer: Select to turn the unit into standby mode
automatically when the specified time elapses.
 InstaPrevue: Select to preview videos input from the
HDMI input jacks collectively in a single screen. The screen
has a main window (current input video) and sub windows
(other input videos). To switch the current input, select the
Step 3:
desired sub window with the cursor buttons and press
ENTER.
• A black sub window is shown for the input with no video
signals.
• "InstaPrevue" cannot be selected if the video is being
input from HDMI IN 6 or there is no signal from the input
currently selected.
• Depending on video signals, the picture may not be
properly rendered on the preview thumbnails.
• 1080p or higher resolution is not supported.
 Setup: You can change the assignment of input terminals
and input selector buttons and also make various speaker
settings and other advanced settings.
 Network Service: Select to use various Internet radio
services and DLNA.
• "Network Setup" becomes selectable after the network
starts up even if it cannot be selected first. It may take
about a minute to start up.
• When "Network Service" is selected for the first time,
the "DISCLAIMER" screen will appear on the TV. Select
"Agree" if you agree the content. If you do not agree the
content, you cannot use the network service.
¼ You cannot use the function unless the TV is connected via HDMI since ¼
selecting "Agree" in the "DISCLAIMER" screen is not possible.
• Layout of the icons in the "Network Service" top menu
can be changed. Press NET on the remote controller
and press D. Select the source icon with the cursors and
press ENTER, and then select the destination icon and
press ENTER. The positions of the icons are switched
each other.
 USB: Select to connect a USB storage device to the USB
port so that it can be played.
• "USB" becomes selectable after the USB function starts
up even if it cannot be selected first. It may take about a
minute to start up.
Playing Back