Canister Cleaner - Hoover Power Nozzle Owner's Manual

q
Unpack cleaner from carton and
identify the parts shown. Remove
and dispose packing.
A. Canister Cleaner
B. Power nozzle
C. Paper bag (installed in cleaner)
D. Extension wands, hose and
cleaning tools (only one of the
combinations shown is included)
The assembled cleaner will look like
the drawing above.
2
3
1 .Power nozzle
place
cleaner on end and hook clip on
bottom of cleaner
3. Lightweight hose
4. Spring latch:
locks extension
wands together or locks wand to
nozzle or tool.
Plastic latch ring on plastic
wands:
see item #IO
Extension wands:
5. used with rug
and floor nozzle. One or both
wands may be used with cleaning
tools. (Some models have
wands;
some models have
wands.)
Hand grip
6.
Receptacle:
7. connects power nozzle
cord underneath hand grip.
Cord clip:
8. fastens nozzle cord to
extension wands. On some models
a separate cord clip snaps onto
wands.
9. Suction regulator:
close for maxi-
mum suction; open if power nozzle
is difficult to push on some carpets
or if lightweight rugs or draperies
are being cleaned.
located on hand
grip and plastic wands; rotate to
lock wands and cleaning tools to
hose.
6 -
7 -
11. Cord hook:
quick cord release.
On some models:
Cord rewind pedal:
to rewind cord for storage.
plug until cord is rewound.
12. Dusting brush
13. Crevice tool
14. Wall/floor brush*
15. Furniture nozzle
16. Large wheels:
when cleaner is pulled over carpet,
area rugs and door sills.
17. On-Off pedal:
on top of cleaner.
18. Bag lid latch:
plastic
19. Bag lid
metal
20. Check bag indicator*:
when paper bag should be
checked for fullness.
21. Hose connector
22. Receptacle:
cord to canister cleaner.
23. Carrying handle
24. Headlight*
*Available on some models
This cleaner is intended for household
use.
fied on data plate on bottom of cleaner.
rotate hook inward for
step on pedal
Hold
provide easy towing
conveniently located
lift to open bag lid.
shows red
connects power nozzle