Planet Audio SW Series Specifications

10” (25.4 cm) subwoofer

Advertisement

Technical Support
Congratulations on your purchase of the Planet Audio SW Series
If you need technical support with your Planet Audio product or have
Subwoofer. Planet Audio takes great pride in producing products
questions about its use, please contact us:
that sound and look great, but stand up to the daily rigors applied
805.751.4853
by audio enthusiasts around the world.
www.PlanetAudioUSA.com
*Due to ongoing product development, specifications are subject to change without notice.
5
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Planet Audio SW Series

  • Page 1 Technical Support Congratulations on your purchase of the Planet Audio SW Series If you need technical support with your Planet Audio product or have Subwoofer. Planet Audio takes great pride in producing products questions about its use, please contact us: that sound and look great, but stand up to the daily rigors applied 805.751.4853...
  • Page 2 Enclosures The SW10D is designed to work in a small sized sealed enclosure, 0.75ft³. Since the woofer has pole-vent, it needs a minimum clear- ance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the sub- woofer, it has been designed for maximum output while retaining great sound quality.
  • Page 3 Wiring your Subwoofer Product Specifications Impedance Dual 4 Ω Parallel Series Resonant Frequency 45 Hz 0.810 4.574 0.984 0.800 ft³ (22.656 liters) Xmax 12 mm Sensitivity (1 W/ 1 m) 85 dB Peak Power Handling 1800 W 2 Ω 8 Ω Mounting Depth 4-3/4”...

This manual is also suitable for:

Sw10d

Table of Contents