Table of Contents
Advertisement
4. Turn the Notebook over (right side up).
5. Pull the display release latches to open the display.
6. Lift up the front end and turn over the palmrest cover, allowing it to rest on top of the
keyboard.
7. Disconnect the flex cable from the ZIF connector on the palmrest cover.
To replace the palmrest cover, reverse these procedures.
CAUTION: When replacing the palmrest cover, ensure that the cable is fully
Ä Ä Ä Ä
inserted into the ZIF connector on the system board. If the metal end comes
in contact with the keyboard, the Notebook may be damaged.
Note: When replacing the palmrest cover, ensure that the cable is properly routed
through the slot on the Upper CPU Cover.
14 R
S
EMOVAL
EQUENCE
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
P
N
M
RESARIO
OTEBOOK
AINTENANCE AND
S
G
1200XL S
ERVICE
UIDE
ERIES
Advertisement
Table of Contents
