Gold's Gym Power Spin 210 U User Manual page 9

9. Attach the Seat (12) to the Seat Post (5) with four M8
Nylon Locknuts (10) and four M8 Split Washers (41).
Note: The Nylon Locknuts and the Split Washers may
be preattached to the underside of the Seat.
10. Identify the Left Pedal (24), which is marked with an
"L." Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the left arm of the
Crank (21). Tighten the Right Pedal (not shown)
clockwise into the right arm of the Crank. IMPOR-
TANT: Tighten both Pedals as firmly as possible.
After using the exercise cycle for one week,
retighten the Pedals. For best performance, keep
the Pedals tightened.
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Pedal Strap onto the
tab on the Left Pedal (24). Adjust the Right Pedal
Strap (not shown) in the same way.
11. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
Downloaded from www.Manualslib.com manuals search engine
9
12
41
10
25
24
Tab
9
5
41
10
10
21