Turn On The Camera - Nikon Coolpix S8000 User Manual

Turn On the Camera

4
Step
Press the power switch to turn on the
camera. The power-on lamp (green) will
light for a moment and the monitor will
turn on.
Pai
Power Saving Function (Auto Off)
If no operatiorls are performed for a while, the monitor will tum off automatically, the camera
will enter standby mode, and the power-on lamp will blink. If no operations are performed for
another three minutes, the camera will turn off automatically.
• If no operations are performed for about a minute (default setting) in shooting or playback
mode, the camera will enter standby mode.
• When the monitor has turned off in standby mode (the power-on lamp is blinking), press
the following button to reactivate it.
- Power switch, shutter-release button,
5 Choose a Language and Set the Camera Clock
Step
A language-selection dialog is displayed the first time the camera is turned on.
Follow the procedures below to choose a language and set the time and date.
The Rotary Multi Selector
Use the rotary multi selector to choose and apply settings.
Press the rotary multi selector up, down, left, or right, or press
®
the button.
Move the highlight up
Return to the previous screen
(move the highlight to the left)
Move the highlight down
5.1
Choose the desired language and
®
press the button.
Rotary multi selector operations used are
O.
indicated with
0
[E]
button, button, or •
.~ r-
Items can also be highlighted by
~\
rotating the rotary multi selector
-4''(@li)-
Advance to
~~
(move the highlight to the nght)
• Apply selection
5.2
Choose
The time zone selection screen is
displayed.
(movie-record) button
~he ~ext
screen.
®
Yes
and press the
First Steps
button.