Sony TRINITRON GDM-500PS Service Manual page 11

Using the OPTION On-screen
Display
The OPTION OSD allows you to manually degauss the
screen and adjust settings such as the OSD position and
power saving delay time. It also allows you to lock the
controls.
Degaussing the screen
The monitor screen is automatically degaussed
(demagnetized) when the power is turned on.
You can also manually degauss the monitor.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
ZZ... 1 MIN
UNLOCK
MANUAL DEGAUSS
3
Press the ¨./> buttons to select " (MANUAL
DEGAUSS)."
4
Press the > / button.
The screen is degaussed for about 3 seconds.
If you need to degauss the screen a second time, wait for at
least 20 minutes before repeating the steps above.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
Getting Started
Customizing Your Monitor
Changing the on-screen display position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
ZZ... 1 MIN
UNLOCK
MANUAL DEGAUSS
EN
3
Press the ¨./> buttons to select " (OSD H
F
POSITION)" or " (OSD V POSITION)."
Select " (OSD H POSITION)" to adjust the horizontal
ES
position.
OPTION C
ZZ... 1 MIN
UNLOCK
OSD H POSITION
Select " (OSD V POSITION)" to adjust the vertical
position.
OPTION
AUTO
ZZ...
UNLOCK
OSD V POSITION
4
Press the >?// buttons to move the OSD to the
desired position.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
15
Customizing Your Monitor
Setting the power saving delay time
You can set the delay time before the monitor enters the
power saving mode. See page 19 for more information on
this monitor's power saving capabilities.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
ZZ... 1 MIN
UNLOCK
MANUAL DEGAUSS
3
Press the ¨./> buttons to select " ZZ... (PWR SAVE
DELAY)."
OPTION
AUTO
5 SEC 1 MIN
ZZ... 60 MIN OFF
PWR SAVE DELAY
4
Press the >?// buttons to select the desired time.
When PWR SAVE DELAY is set to "OFF," the monitor
does not go into power saving mode.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
16
Locking the controls
The control lock function disables all of the buttons on the
front panel except the u (power) switch, MENU and INPUT
buttons.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
OPTION
ON
ZZ...
1 MIN
UNLOCK
MANUAL DEGAUSS
3
Press the ¨./> buttons to select " (CONTROL
LOCK)."
OPTION
AUTO
ZZ...
UNLOCK LOCK
CONTROL LOCK
4
Press the >?// buttons to select "LOCK."
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
Once you select "LOCK," you cannot select any items
except "EXIT" and " OPTION" in the MENU OSD.
If you press any button other than the u (power) switch,
MENU and INPUT buttons, the mark appears on the
screen.
To cancel the control lock
Repeat steps 1 through 3 above and press the >?//
buttons to select "UNLOCK."