Vivitek D5I8ZHDB User Manual page 53

DLP Projector—User's Manual
8. Reverse steps 1 to 7 to
install the new lamp
module.
While installing, align the
lamp module with the
connector and ensure it is
level to avoid damage.
Note:
The lamp module must sit
securely in place and the
lamp connector must be
connected properly before
tightening the screws.
9. Turn on the projector and reset the lamp after the lamp module is replaced.
Lamp Reset:
Press Menu → Select Basic Setup →Lamp Setting →Reset Lamp Timer → Press the
▲▼ buttons to adjust the settings.
— 44 —