Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vivitek D5I80HD
Summary of Contents for Vivitek D5I80HD
- Page 2 Copyright This publication, including all photographs, illustrations and software, is protected under international copy- right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2011 Disclaimer The information in this document is subject to change without notice.
-
Page 3: Important Safety Information
DLP Projector—User’s Manual Important Safety Information Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations. -
Page 4: Projector Installation Notice
Projector Installation Notice Place the projector in a horizontal position The tilt angle of the projector should not exceed 15 degrees, nor should the projector be in- stalled in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead to other unpredictable damages. - Page 5 DLP Projector—User’s Manual Verify Installation Location To supply power, the 3-blade (with earthing lead) socket should be used to ensure proper grounding and equalized ground potential for all of the equipment in the Projector System. The power code provided with the Projector should be used. In case of any missing item, other qualified 3-blade (with earthing lead) power cord can be used as substitution;...
- Page 6 Choosing a Projector Edge blending application Not only brightness, bright balances, lens but stability is important too when choosing a projector. A projector need 30 to 60 minutes warm up to adjust properly. After lens shift, there should not be any optical distortion such as trapezoidal and barrel shape distortions.
- Page 7 DLP Projector—User’s Manual Power Safety Only use the supplied power cord. Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp Replacing the lamp can be hazardous if done incorrectly.
-
Page 8: Main Features
Main Features • Lightweight unit, easy to pack away and transport. • Compatible with all major video standards including NTSC, PAL, and SECAM. • A high brightness rating allows for presentations in daylight or in lit rooms. • Supports resolutions up to WUXGA at 16.7 million colors to deliver crisp, clear images. •... -
Page 9: Table Of Contents
DLP Projector—User’s Manual Table of contents GETTING STARTED................................1 ................................1 ACKING HECKLIST ............................... 2 IEWS OF ROJECTOR ARTS Front-right View ................................2 Top view—On-screen Display (OSD) buttons and LEDs..................3 Rear view..................................4 Bottom view................................... 6 ..............................7 EMOTE ONTROL ARTS .......................... - Page 10 ................................48 MAGE ROBLEMS ................................49 ROBLEMS ............................49 EMOTE ONTROL ROBLEMS ................................49 UDIO ROBLEMS ..........................49 AVING THE ROJECTOR ERVICED HDMI Q & A ..................................50 SPECIFICATIONS ................................51 ................................. 51 PECIFICATIONS (1080P) ...................... 52 ROJECTION ISTANCE VS ROJECTION Projection Distance and Size Table.........................
-
Page 11: Getting Started
DLP Projector – User’s Manual ETTING TARTED Packing Checklist Carefully unpack the projector and check that the following items are included: ROJECTOR EMOTE CONTROL CABLE OWER CORD ATTERIES NOT INCLUDED CD-ROM ARRANTY UICK TART ’ S MANUAL Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service. -
Page 12: Views Of Projector Parts
DLP Projector—User’s Manual Views of Projector Parts Front-right View ABEL ESCRIPTION EE PAGE IR receiver Receives IR signal from remote control Lens Projection Lens Focus ring Focuses the projected image Zoom ring Enlarges the projected image Height adjuster Adjusts level of projector See Top view—On-screen Display (OSD) but- Function keys tons and LEDs. -
Page 13: Top View-On-Screen Display (Osd) Buttons And Leds
DLP Projector – User’s Manual Top view—On-screen Display (OSD) buttons and LEDs ABEL ESCRIPTION PAGE MENU Opens and exits OSD menus Navigates and changes settings in the OSD Quick Menu – For Keystone ENTER Enter or confirm highlighted OSD menu item BLANK Displays a blank screen and mutes audio Navigates and changes settings in the OSD... -
Page 14: Rear View
DLP Projector—User’s Manual Rear view ABEL ESCRIPTION EE PAGE RJ-45 Connect a LAN cable from Ethernet Connect a DISPLAYPORT cable from a DISPLAYPORT device HDMI Connect the HDMI cable from a HDMI device Connect the DVI cable from a computer VGA1 Connect an RGB cable from a computer or a video enabled device Turns the projector on or off (main power switch must... - Page 15 DLP Projector – User’s Manual ABEL ESCRIPTION EE PAGE Connect the 12V OUT (Screen Trigger-- For screen controllers used) 12V OUT Wire remote control connector (connect with wire remote connector of the WIRE IR Remote Control set) AUDIO 1 Connect an AUDIO cable from the input device Connect an AUDIO cable from the input device AUDIO 2 Share audio input with DVI.
-
Page 16: Bottom View
DLP Projector—User’s Manual Bottom view ABEL ESCRIPTION EE PAGE Tilt adjustor Rotate adjuster lever to adjust angle position. Contact your dealer for information on mounting the projector on a Ceiling support holes ceiling Note: When installing, ensure that you use only UL Listed ceiling mounts. For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw depth of 6 mm (0.23 inch). -
Page 17: Remote Control Parts
DLP Projector – User’s Manual Remote Control Parts Important: 1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo- rescent lights can disrupt remote control operation. 2. Be sure nothing obstructs the path between the remote control and the projector. If the path be- tween the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces such as projector screens. - Page 18 DLP Projector—User’s Manual ABEL ESCRIPTION EE PAGE Power OFF Turns the projector off Displays the DVI source selection Displays the VGA source selection Displays the Display Port source selection Up cursor / Navigates and changes settings in the OSD Keystone+ Quick Menu –...
-
Page 19: Remote Control Operating Range
DLP Projector – User’s Manual Remote Control Operating Range The remote control uses infrared transmission to control the projector. It is not necessary to point the remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. -
Page 20: Setup And Operation
DLP Projector—User’s Manual ETUP AND PERATION Inserting the Remote Control Batteries Remove the battery compartment cover by sliding the cover in the di- rection of the arrow. Insert the battery with the positive side facing up. Replace the cover. Caution: 1. -
Page 21: Installing Or Removing The Optional Lens
DLP Projector – User’s Manual Installing or Removing the Optional Lens Caution: Do not shake or place excessive pressure on the projector or the lens components as the projec- tor and lens components contain precision parts. Before removing or installing the lens, be sure to turn off the projector, wait until the cooling fans stop, and turn off the main power switch. -
Page 22: Installing The New Lens
DLP Projector—User’s Manual Installing the New Lens Align the notches and correctly posi- tion the electrical contact pad as shown in the picture. Note: Pin of IRIS should be in the direction as shown in the picture. Rotate the lens clockwise until you feel it click into place. -
Page 23: Starting And Shutting Down The Projector
DLP Projector – User’s Manual Starting and Shutting down the Projector Remove the lens cap. Securely connect the power cord and signal cable. When connected, the power led will turn red. Turn on the lamp by pressing “ ” button on the rear of the projector or “... - Page 24 DLP Projector—User’s Manual • DVI: DVI If more than one input device is con- nected, press the SOURCE button • HDMI: HDMI to scroll among devices. • VGA1/ VGA2: Analog RGB (Component is supported through the RGB to COMPONENT • DP: DISPLAYPORT input ADAPTER.) •...
-
Page 25: Adjusting The Projector Level
DLP Projector – User’s Manual Adjusting the Projector Level Take note of the following when setting up the projector: • The projector table or stand should be level and sturdy. • Position the projector so that it is perpendicular to the screen. •... -
Page 26: Adjusting Projected Image Position Using Shift
DLP Projector—User’s Manual Adjusting Projected Image Position Using Shift The Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Shift is a unique system that provides lens shift while maintaining a much higher ANSI contrast ratio than traditional lens shift systems. -
Page 27: Adjusting The Horizontal Image Position
DLP Projector – User’s Manual Adjusting the horizontal image position With the lens in the center position the horizontal image position can be adjusted to the left or right by up to a maximum of 10% of the half image width. Note that the maximum horizontal image height ad- justment can be limited by the vertical image position. -
Page 28: Adjusting The Zoom, Focus And Keystone
DLP Projector—User’s Manual Adjusting the Zoom, Focus and Keystone Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size. Use the Image-focus control (on the projector only) to sharpen the projected image. Use the KEYSTONE buttons (on the projec- tor or the remote control) to correct im-... -
Page 29: Adjusting The Volume
DLP Projector – User’s Manual Adjusting the Volume Press the Volume +/-. buttons on the remote control. The volume control appears on the display. Press the but- tons on the keypad to adjust Volume +/-. Press the MUTE button to turn off the volume (This feature is avail- able only on the remote). -
Page 30: On-Screen Display (Osd) Menu Settings
DLP Projector—User’s Manual (OSD) M CREEN ISPLAY ETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. -
Page 31: Setting The Osd Language
DLP Projector – User’s Manual Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ▲▼ button to navigate to Basic Setup. 2. Press the cursor ▲▼ button until Language is highlighted. 3. -
Page 32: Osd Menu Overview
DLP Projector—User’s Manual OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. Image Settings Picture Mode Movie/Bright/Normal/User 1/User 2/User 3 Brightness Contrast Saturation Tint Sharpness Advanced Reset Yes/No Auto Adjustment Image Settings>>... -
Page 33: Image Settings
DLP Projector – User’s Manual Image Settings Press the MENU button to open the OSD menu. Press the cursor ▲▼ button to move to the Image Settings menu. Press ENTER / ► button to move up and down in the Image Settings item. Press ENTER / ►... -
Page 34: Advanced Feature
DLP Projector—User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ▲▼ to move to the Image Settings menu. Press ENTER / ► button in the Advanced item. Press ENTER / ► button to entry item.Press▲▼to move to the Advanced item and then press ENTER or ►or ◄►... - Page 35 DLP Projector – User’s Manual Video Adjustment ESCRIPTION Press ENTER / ► button to enter Noise Reduction submenu, Press the cursor ◄► Noise Reduction button to adjust the Noise Reduction. Flesh Tone Press the cursor ▼▲ button to select different Flesh Tone. Dynamic Contrast Press the cursor ▼▲...
-
Page 36: Display Settings
DLP Projector—User’s Manual Display Settings Press the MENU button to open the OSD menu. Press the cursor ▲▼ button to move to the Display Settings menu. Press ENTER / ► button to move up and down in the Display Settings item. Press ENTER / ►... -
Page 37: Keystone
DLP Projector – User’s Manual Keystone Press the ENTER/ ► button to enter the Keystone sub menu. Press ◄► to change values for set- tings. Press the cursor ◄► button to adjust the V Keystone V Keystone (This function will be disabled when Auto keystone is activated) Press the cursor ◄►... -
Page 38: Hsg Adjustment
DLP Projector—User’s Manual HSG Adjustment Press the ENTER/ ► button to enter the HSG Adjustment item. Press▲▼ or ◄► to change values for settings. ESCRIPTION Press the ▲▼ buttons to set the Primary Color. Primary Color Notes: There are six colors (R/ G/ B/ C/ M/ Y) to be customized. Press the ◄►... -
Page 39: White Balance
DLP Projector – User’s Manual White Balance Press the ENTER button to enter the White Balance sub menu. ESCRIPTION Red Gain Press the ◄► buttons to adjust the Red Gain. Green Gain Press the ◄► buttons to adjust the Green Gain. Blue Gain Press the ◄►... -
Page 40: Audio Settings
DLP Projector—User’s Manual Audio Settings Press the MENU button to open the OSD menu. Press the cursor▲▼ button to move to the Audio Settings menu. Press ENTER / ► button to move up and down in the Audio Settings item. Press ENTER / ►... -
Page 41: Timer Setup
DLP Projector – User’s Manual Timer Setup Press the MENU button to open the OSD menu. Press the cursor▲▼ button to move to the Timer Setup menu. Press ENTER / ► button to move up and down in the Timer Setup item. Press ENTER / ►... -
Page 42: Basic Setup
DLP Projector—User’s Manual Basic Setup Press the MENU button to open the OSD menu. Press the cursor▲▼button to move to the Basic Setup menu. Press ENTER / ► button to move up and down in the Basic Setup item. Press ENTER / ►... -
Page 43: Menu Setting
DLP Projector – User’s Manual Menu Setting ESCRIPTION Menu Position Press the cursor▲▼button to select a different OSD location. Menu Display Time Press the cursor▲▼button to select OSD timeout delay. Transparency Menu Press the cursor ◄► button to select OSD transparency Lamp Setting ESCRIPTION Press the cursor▲▼button to select the lamp mode for higher brightness or lower... -
Page 44: Advanced Setup
DLP Projector—User’s Manual Advanced Setup Press the Menu button to open the OSD menu. Press ▲▼ to move to the Advanced Setup menu Press ENTER / ► button to move up and down in the Advanced Setup item. Press ENTER / ► but- ton to entry item. -
Page 45: Network Settings
DLP Projector – User’s Manual Network Settings ESCRIPTION Press the▲▼buttons to select projector remote command control. Selecting RJ45 enables RJ45 control and disables the RS232 port. Selecting RS232 enables RS232 control and disables the RJ45 network port. When RS232 control is enabled, the serial port settings are fixed to: Control By 115200 Baud;8-bits;No parity;1 Stop-bit;No flow control (Range: RS232/ RJ45) - Page 46 DLP Projector—User’s Manual Network Status ESCRIPTION Network Status Displays the network connection status. Press▲▼to turn DHCP On or Off. Note: If user selects ‘DHCP’ Off, it will still use user apply IP setting or default RJ45 DHCP IP setting. If user selects ‘DHCP’ On, it will use dynamic IP address and IP setting from DHCP server on the network..
- Page 47 DLP Projector – User’s Manual For simplicity and ease of operation, the projector provides diverse networking and remote management features. The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off, Brightness and Contrast settings. Also, projector status information, such as: Video-Source, Sound-Mute, etc .
- Page 48 DLP Projector—User’s Manual 3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the General tab, and select Internet Protocol (TCP/IP). 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. —...
- Page 49 DLP Projector – User’s Manual 7. Press the Menu button on the projector. Select Advanced Setup → Network Settings → Control By → RJ45 option. After getting into Network Status, input the following: DHCP: Off IP Address: 10.10.10.10 Subnet Mask: 255.255.255.0 Gateway: 0.0.0.0 DNS Server: 0.0.0.0 10.
- Page 50 DLP Projector—User’s Manual ATEGORY NPUT ENGTH IP Address Crestron Control IP ID Port Projector Name Projector Location Assigned To DHCP (Enabled) (N/A) IP Address Network Configuration Subnet Mask Default Gateway DNS Server Enabled (N/A) User Password New Password Confirm Enabled (N/A) Admin Password New Password...
-
Page 51: Information Menu
DLP Projector – User’s Manual Information Menu Press the MENU button to open the OSD menu. Press the cursor▲▼button to move to the Information Menu.. ESCRIPTION Source Displays the activated input source. Resolution Displays the native resolution of input source. Lamp Hour Displays the number of hours the lamp has been in use. -
Page 52: Maintenance And Security
DLP Projector—User’s Manual AINTENANCE AND ECURITY Replacing the Projection Lamp The projection lamp should be replaced when it burns out. It should only be replaced with a certified replacement part, which you can order from your local dealer. Important: a. The projection lamp used in this product contains a small amount of mercury. b. - Page 53 DLP Projector – User’s Manual Unlock the lamp cover. Pull up and remove the cover. Use a screwdriver to re- move the screws from the lamp module. Pull out the lamp module. – 43 –...
- Page 54 DLP Projector—User’s Manual Reverse steps 1 to 7 to install the new lamp module. While installing, align the lamp module with the connector and ensure it is level to avoid damage. Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws.
-
Page 55: Cleaning The Projector
DLP Projector – User’s Manual Cleaning the Projector Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. -
Page 56: Using The Physical Lock
DLP Projector—User’s Manual Using the Physical Lock ® Using the Kensington Lock If you are concerned about security, attach the projector to a permanent object with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensington security cable. The security lock corresponds to Kensington’s MicroSaver Security System. -
Page 57: Troubleshooting
DLP Projector – User’s Manual ROUBLESHOOTING Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection. -
Page 58: Led Error Messages
DLP Projector—User’s Manual LED Error Messages OWER RROR ESSAGES Lamp Ready － － － Start flashing － － － Cooling flashing － － － Over Temperature － － － Thermal Break Sensor error 4 blinks － － － Lamp Error 5 blinks －... -
Page 59: Lamp Problems
DLP Projector – User’s Manual Adjust the Color Temperature and Gamma settings on the Display Settings menu of the OSD. Lamp Problems Problem: There is no light from the projector 1. Check that the power cable is securely connected. 2. Ensure the power source is good by testing with another electrical device. 3. -
Page 60: Hdmi Q & A
DLP Projector—User’s Manual HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed cables. ˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or up to 2.25Gbps, which is the equivalent of a 720p/1080i signal. -
Page 61: Specifications
DLP Projector – User’s Manual PECIFICATIONS Specifications Display type 1080P 0.65” Resolution 1080P 1920x1080 Native Projection distance 1.5 meters ~ 7 meters (Standard projection len) Projection screen size 35 to 205 inches (Standard projection len) Projection lens Manual Focus/Manual Zoom (Standard projection len) Zoom ratio 1.25 (Standard projection len) Vertical keystone correction... -
Page 62: Projection Distance Vs. Projection Size (1080P)
DLP Projector—User’s Manual Projection Distance vs. Projection Size (1080P) Keystone Correction Angle Projection Distance V-Sync Projection Distance and Size Table Standard projection len: TR: 1.54~1.93; offset=120% Distance (m) 1.71 3.42 4.27 8.55 1.70 3.41 6.82 10.23 Diagonal (inch) Keystone Correction 9.92 9.92 9.92... - Page 63 DLP Projector – User’s Manual Short throw projection len: TR: 0.77; offset=120% Distance (m) 0.68 1.36/ 1.70 2.56 Diagonal (inch) Keystone Correction 23.67 23.67 23.67 23.67 Angle (degree) Image Height (mm) 1245 1868 Image Width (mm) 1771 2214 3321 A (mm) –...
-
Page 64: Timing Mode Table
DLP Projector—User’s Manual Timing Mode Table HDMI / IDEO IGNAL ESOLUTION OMPONENT IDEO NTSC 15.734 60.0 － － － － － PAL/SECAM 15.625 50.0 － － － － － 720 x 400 37.9 85.0 － － 640 x 480 31.5 60.0 －... - Page 65 DLP Projector – User’s Manual HDMI / IDEO IGNAL ESOLUTION OMPONENT IDEO 1600 x 1200 75.0 60.0 － － VESA 1920 x 1080 67.5 60.0 － － 1920 x 1200 74.04 59.95 － － 640 x 480 35.0 66.68 － －...
-
Page 66: Projector Dimensions
DLP Projector—User’s Manual Projector Dimensions — 56 —... -
Page 67: Regulatory Compliance
DLP Projector – User’s Manual EGULATORY OMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. - Page 68 DLP Projector—User’s Manual PPENDIX RS-232C Protocol RS232 Setting Baud rate: 115200 Parity check: None Data bit: Stop bit: Flow Control None RS-232 Setup for D5180 / D5185 In the main HyperTerminal window, 1. Select “Property” from the “File” Menu 2. Select “Setting” Tab 3.
- Page 69 DLP Projector – User’s Manual Operation Command Note: XX=00-98, projector's ID, XX=99 is for all projectors D5180/D5185 -> V99Sxxxx Return Result P=Pass / F=Fail n: 0:Disable/1: Enable/Vaule(0~9999) Command Group 00 ASCII Function Description Return Result VXXS0001 56H 39H 39H 53H 30H 30H 30H 31H 0DH Power On VXXS0002 56H 39H 39H 53H 30H 30H 30H 32H 0DH...
- Page 70 DLP Projector—User’s Manual Command Group 01 ASCII Function Description Return Value 0:Movie 1:Bright 2:Normal VXXG0108n 56H 39H 39H 47H 30H 31H 30H 38H 0DH Get Picture Mode 3.User1 4.User2 5.User3 0:Movie 1:Bright 2:Normal VXXS0108n 56H 39H 39H 53H 30H 31H 30H 38H n 0DH Set Picture Mode 3.User1 4.User2...
- Page 71 DLP Projector – User’s Manual Command Group 03 ASCII Function Description Return Value VXXG0305 56H 39H 39H 47H 30H 33H 30H 35H 0DH Get Volume n=0~10 Pn/F VXXS0305n 56H 39H 39H 53H 30H 33H 30H 35H n 0DH Set Volume n=0~10 0:Front 1:Front+Ceiling...
-
Page 72: Rs-232C Protocol
DLP Projector—User’s Manual PPENDIX The D5180HD family include the following models D5I80HD D5I8ZHDA D5I8ZHDB D5I8ZHDC D5I8ZHDD D5I8ZHDE D5I8ZHDF D5I8ZHDG D5I8ZHDH D5I8ZHDI D5I8ZHDJ D5I8ZHDK D5I8ZHDL D5I8ZHDM D5I8ZHDN D5I8ZHDO — 62 —... -
Page 73: D5185Hd Edge Blending
DLP Projector – User’s Manual PPENDIX D5185HD Edge Blending Equipment Requirement Display Units：two D5185HD projectors recommended to have similar brightness levels or closed lamp hour used. Source Input：a personal computer (PC) with Intel® Core™ i7 processor with 4GB Memory and Win- dows®... - Page 74 DLP Projector—User’s Manual Projector Setup 2：Advance Setup page, entry Alignment Projector Setup 3：Alignment Status = ON — 64 —...
- Page 75 DLP Projector – User’s Manual Projector Setup 4：Enter Warp and fine tune the screens by the Warp functions Projector Setup 5：Enter Blending and fine tune the screen by the Blending functions Projector Setup 6：minimize the brightness difference between the two projectors by adjusting the While Level / Black Level / Lamp Power functions –...
- Page 76 DLP Projector—User’s Manual 10. Projector Setup 7：cut off unnecessary part by using the Blanking function 11. Open up a picture to verify the blending status and repeat the above steps if necessary. — 66 —...
Need help?
Do you have a question about the D5I80HD and is the answer not in the manual?
Questions and answers