Table of Contents
Advertisement
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright 2009
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
sentations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
— i —
Advertisement
Table of Contents
Related Manuals for Vivitek D513W
Summary of Contents for Vivitek D513W
- Page 1 Copyright This publication, including all photographs, illustrations and software, is protected under international copy- right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright 2009 Disclaimer The information in this document is subject to change without notice.
- Page 2 Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
- Page 3 Ensure that the intake vents do not recycle hot air from the exhaust vent. When operating the projector in an enclosed space, ensure that the surrounding air temperature within the enclosure does not exceed 5 – 35°C while the projector is running, and the air intake and exhaust vents are unobstructed.
- Page 4 Unplug the power cord before cleaning. See Cleaning the Projector page 38. Allow the lamp to cool for about one hour. Regulatory Warnings Before installing and using the projector, read the regulatory notices in the Regulatory Compliance on page 52. Important Recycle Instructions: Lamp(s) inside this product contain mercury.
- Page 5 Input source automatically detected. About this manual This manual is intended for end users and describes how to install and operate the DLP projector. Wher- ever possible, relevant information—such as an illustration and its description—has been kept on one page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting the environment.
-
Page 6: Table Of Contents
— ’ — ’ — ’ GETTING STARTED ... 1 ... 1 ACKING HECKLIST ... 2 IEWS OF ROJECTOR ARTS D5 Series Front-right View... 2 Top view—On-screen Display (OSD) buttons and LEDs ... 3 Rear view ... 4 Bottom view... 5 ... - Page 7 ... 42 UDIO ROBLEMS AVING THE ROJECTOR ERVICED HDMI Q & A ... 43 SPECIFICATIONS... 44 ... 44 PECIFICATIONS D5 Economic series ... 44 D5 Advanced SVGA/XGA series ... 45 D5 Advanced WXGA series... 46 ROJECTION ISTANCE VS ROJECTION D5 Series Projection Distance and Size Table... 47 D5 S ERIES IMING...
-
Page 8: Getting Started
Packing Checklist Carefully unpack the projector and check that the following items are included: EMOTE CONTROL 3V CR2025 WITH ONE BATTERY CD-ROM (*) ’ S MANUAL Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service. -
Page 9: Views Of Projector Parts
Zoom ring (*) Function keys Height adjuster Important: Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the ventilation openings. Note: (*)Not available in D508 / D509 / D520ST... -
Page 10: Top View-On-Screen Display (Osd) Buttons And Leds
MENU ◄ (Left cursor) / Source ESCRIPTION Lamp error Normal State Turns the projector On or Off System over temperature Normal State Navigates and changes settings in the OSD Quick Menu – For Keystone Navigates and changes settings in the OSD... -
Page 11: Rear View
— ’ — ’ — ’ Rear view ABEL Kensington Lock HDMI (*1) AC IN AUDIO IN (L and R) VIDEO IN S-VIDEO IN AUDIO IN RS-232C (*2) RGB IN Note: (*1) Not available in D508 / D509 (*2) Change to USB connector – only available in D508 / D509 Note: If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the S-VIDEO connector. -
Page 12: Bottom View
Adjuster drops down when adjuster button is pushed. Push to release adjustor. To fasten the lens cap cover Rotate adjuster lever to adjust angle position. Contact your dealer for information on mounting the projector on a ceiling – 5 – – ’... -
Page 13: Remote Control Parts
2. Be sure nothing obstructs the path between the remote control and the projector. If the path be- tween the remote control and the projector is obstructed, you can bounce the signal off certain reflective surfaces such as projector screens. - Page 14 Left cursor Menu ESCRIPTION Navigates and changes settings in the OSD Changes settings in the OSD Turns the projector On or Off Navigates and changes settings in the OSD Increase volume Decrease volume Mutes the built-in speaker Freeze/unfreezes the on-screen picture...
-
Page 15: Remote Control Operating Range
Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. If the projector does not respond to the remote control, move a little closer. -
Page 16: Setup And Operation
Replace the cover. Caution: 1. Only use a 3V lithium battery (CR2025). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the battery when not using the projector for prolonged periods. — 9 — ETUP AND PERATION... -
Page 17: Connecting Input Devices
’ Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector. -
Page 18: Starting And Shutting Down The Projector
Starting and Shutting down the Projector Connect the power cord to the projector. Connect the other end to a wall outlet. POWER LED on the projector light. Turn on the connected devices. Ensure the LAMP LED not a flashing orange. Then press the button to turn on the projector. - Page 19 POWER button. The projector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the LAMP LED stops flashing–indicating the projector has cooled down. – 12 –...
-
Page 20: Setting An Access Password (Security Lock)
OSD on page 18 and Setting the OSD Language on page 19 for help on using OSD menus.) Important: Keep the password in a safe place. Without the password, you will not be able to use the projector. If you lose the password, contact your reseller for information on clearing the password. - Page 21 — ’ — ’ — ’ You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password entry. You can use any combination including the same arrow five times, but not less than five. Press the cursor buttons in any order to set the password.
-
Page 22: Adjusting The Projector Level
Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. You could trip over them. To raise the level of the projector, lift the projector [A] and press the height-adjuster button [B]. The height adjuster drops down [C]. -
Page 23: Adjusting The Zoom, Focus And Keystone
’ — ’ — ’ Adjusting the Zoom, Focus and Keystone Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size Use the Image-focus control (on the projector only) to sharpen the pro-... -
Page 24: Adjusting The Volume
Adjusting the Volume Press the Volume +/- buttons on the remote control. The volume control appears on the display. Press the Left or Right Cursor buttons on the keypad to adjust Volume +/-. Press the MUTE button to turn off the volume (This feature is available only on the remote). -
Page 25: On-Screen Display (Osd) Menu Settings
The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the projector. -
Page 26: Setting The Osd Language
– ’ – ’ – ’ Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the MENU button. Press the cursor ◄► button to navigate to Installation I. 2. Press the cursor ▲▼ button until Language is highlighted. 3. -
Page 27: Osd Menu Overview
— ’ — ’ — ’ OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. – 20 –... -
Page 28: Osd Sub-Menu Overview
– ’ – ’ – ’ OSD Sub-Menu Overview Note: (*) Not available in D508 / D509 – 21 –... -
Page 29: Image Menu
— ’ — ’ — ’ Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings. -
Page 30: Advanced Feature
Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. -
Page 31: Color Manager
— ’ — ’ — ’ Color Manager (Enter) / ► to enter the Color Manager sub menu. Press Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Green Color Manager. Green Press the ◄►... -
Page 32: Computer Menu
Computer Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Com- puter menu. Press the cursor ▲▼ button to move up and down in the computer menu. Press ◄► to change values for settings. -
Page 33: Video/Audio Menu
— ’ — ’ — ’ Video/Audio Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu. Press ◄►... -
Page 34: Audio
Audio Press (Enter) / ► to enter the Audio sub menu. Volume Press the ◄► buttons to adjust the audio volume. Mute Press the ◄► buttons to turn on or off the speaker. Audio Input Press the cursor ◄► button to select audio input. ESCRIPTION –... -
Page 35: Installationi Menu
— ’ — ’ — ’ Installation I Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄►... -
Page 36: Advanced
Advanced (Enter) / ► to enter the Advanced sub menu. Press Press the cursor ◄► button to enable or disable security lock function. Security Lock Press the cursor ◄► button to enable or disable keypad lock function. Keypad Lock Press the cursor ◄► button to select different wall color setting. Wall Color (Enter) / ►... -
Page 37: Installation Ii Menu
— ’ — ’ — ’ Installation II Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. Auto Source Press the cursor ◄►... -
Page 38: Advanced Feature
Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced menu. -
Page 39: Osd Menu Setting
— ’ — ’ — ’ OSD Menu Setting Menu Position Press ◄► button to select different OSD location. Translucent Menu Press ◄► button to select OSD background translucent level. Menu Display Press ◄► button to select OSD timeout delay. Peripheral Test Remote Control Test Press... -
Page 40: Lamp Hour Reset
– ’ – ’ – ’ Lamp Hour Reset Please refer to Resetting the Lamp on page 37 to reset the lamp hour counter. Factory Reset Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Factory (Enter) / ►... -
Page 41: Status
— ’ — ’ — ’ Status Press the cursor ▲▼ button to move up and down in the Installation II menu. Select the Installation II sub menu and press Active Source Display the activated source. Video Information Displays resolution/video information for RGB source and color standard for Video source. Lamp Hours Lamp hour used information is displayed. -
Page 42: Maintenance And Security
Disposal of this product must be carried out in accordance with the regulations of your local authority. Warning: Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to do so could result in a severe burn. Loosen the captive screw on the lamp compartment cover. - Page 43 — ’ — ’ — ’ Remove the threeo screws from the lamp module. Lift the module handle up. Disconnect the lamp connec- tor. Pull firmly on the module handle to remove the lamp module. Reverse steps 1 to 6 to install the new lamp module.
-
Page 44: Resetting The Lamp
Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installation II menu. Press the cursor button to move down to Advanced. -
Page 45: Cleaning The Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn. -
Page 46: Using The Kensington Lock
® Using the Kensington If you are concerned about security, attach the projector to a permanent object with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensington security cable. The security lock corresponds to Kensington’s MicroSaver Security System. If you have any com- ment, contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. -
Page 47: Troubleshooting
’ Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection. -
Page 48: Led Error Messages
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re- starting the projector. If the Power or Lamp LEDs are still blinking or the Over Temp LED is lit, contact your service center. -
Page 49: Lamp Problems
Having the Projector Serviced If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the original carton. Include a description of the problem and a checklist of the steps you took when trying to fix the problem: The information may be useful to service personnel. -
Page 50: Hdmi Q & A
HDMI Q & A Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI cable? Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed cables. ˙Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or up to 2.25Gbps, which is the equivalent of a 720p/1080i signal. -
Page 51: Specifications
— ’ — ’ — ’ Specifications D5 Economic series Model Display type Resolution Projection distance Projection screen size Projection lens Zoom ratio Throw ratio Vertical keystone correction Projection methods Data compatibility SDTV / EDTV / HDTV Video compatibility H-Sync V-Sync Safety certification Operation temperature... -
Page 52: D5 Advanced Svga/Xga Series
D5 Advanced SVGA/XGA series Model Display type Resolution Projection distance Projection screen size Projection lens Zoom ratio Throw ratio Vertical keystone correction Projection methods Data compatibility SDTV/EDTV/ HDTV Video compatibility H-Sync V-Sync Safety certification Operation temperature Dimensions (WxHxD) AC Input Power consumption Stand By Lamp... -
Page 53: D5 Advanced Wxga Series
— ’ — ’ — ’ D5 Advanced WXGA series Model D513W D537W D522ST Display type TI DMD WXGA 0.65” Resolution WXGA 1280x800 Native Projection distance 1.27 ~ 10m 0.8 ~ 5m Projection screen size 40” ~ 300” 50” ~ 300”... -
Page 54: Projection Distance Vs. Projection Size
Projection Distance vs. Projection Size D5 Series Projection Distance and Size Table D508/ D509 Distance (m) Diagonal Size (inches) Keystone (degree) Image Height (mm) Image Width (mm) A (mm) D510/D510S/D511/ D530/ D535 Distance (m) 1.32 Diagonal (inches) Keystone (degree) Image Height (mm) Image Width (mm) A (mm) IXED... - Page 55 Image Width (mm) A (mm) D522ST WXGA Distance (m) Diagonal (inches) Keystone (degree) Image Height (mm) Image Width (mm) 1013 A (mm) D513W/ D537W Distance (m) 1.27 Diagonal (inches) Keystone (degree) Image Height (mm) Image Width (mm) A (mm) IXED 1676...
-
Page 56: D5 Series Timing Mode Table
D5 Series Timing Mode Table IGNAL ESOLUTION － NTSC － PAL/SECAM VESA 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768... - Page 57 O: Frequency supported —: Frequency not supported * : Displayable level The resolution of the panel is listed below: D508/D510/D520ST/D530 D509/D511/D525ST/D535 D513W/D537W/D522ST Resolution other than native resolution may display with uneven size of text or lines. OMPOSITE / S-V 75.0 60.0 35.0...
-
Page 58: Projector Dimensions
– ’ – ’ – ’ Projector Dimensions – 51 –... -
Page 59: Regulatory Compliance
— ’ — ’ — ’ FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Need help?
Do you have a question about the D513W and is the answer not in the manual?
Questions and answers