Vcr Control - Honeywell HEGS5000 User Manual

6.4

VCR CONTROL

The HEGS5001 controller sends basic commands to the VCR. Refer to the VCR User
Manual for details on the operation of the VCR.
To lock the controller into the VCR mode, press the VCR (
LED lights to indicate that the controller is now in the VCR mode.
Use the joystick and keys 7-14 as described in Section 2.1 to control the VCR. To select
a different VCR, use the Monitor (
Example: To select VCR 2, press Monitor (
To exit the VCR mode, press VCR (
ICON
VCR
Joystick
Rewind
Fast-Forward
Reverse Play
Pause
Counter Reset
0 0 0
Counter Memory
1 2 3
Stop
Index Search
Time and Date
Search
Time Mode
Record
•
Rev. 1.01
KEY
Places the controller into the VCR mode. Press once to
send a single command (LED will flash). Press twice to
lock in VCR mode (LED will stay lit).
The LEFT, RIGHT, UP, and DOWN directions of the
joystick mimic the VCR tape controls
UP
DOWN
RIGHT
LEFT
Twist the joystick knob COUNTERCLOCKWISE to
REWIND.
Twist the joystick knob CLOCKWISE to FAST-FORWARD
Play tape in reverse at regular speed.
Pause tape playback.
Reset VCR counter.
Stop VCR counter to mark location for memory.
Allows an index number to be searched for both the
forward or reverse directions.
Allows an exact time and date to be searched for both
the forward and reverse directions.
Allows the time mode of the VCR to be selected when
logged in as a Master user.
Activate recording on VCR.
47
) key or Press + or – to move between VCRs.
2
) Enter (
).
DESCRIPTION
= Play
= Stop
= Frame Advance
= Frame Rewind
) button twice. The
2 (
) or Monitor ).
900.0800
19-Jun-06