Programming/Editing/Deleting Privacy Zones, Hitachi Camera - Honeywell HEGS5000 User Manual

5.2.13.2 Programming/Editing/Deleting Privacy Zones, Hitachi Camera

To program privacy zones in a KD6/HD6 with a Sony camera:
1. Press the Dome Menu (
2. Press + or - until Sector/Priv Menu is displayed.
3. Press Enter (
4. Press + or – until Program is displayed.
5. Press Enter (
6. Press + or - until P is displayed on the controller LCD.
7. Press Enter (
8. Enter the password. (The factory set password is blank. Just press Enter (
submit a blank password.)
a. Press the + or – key until the desired character is displayed on the LCD screen,
b. Continue selecting characters and press Character Select (
c. Press Enter (
9. Enter the desired privacy number (1 or 2) to program.
10. Press Enter (
Factory set
password
11. Enter the Privacy title (up to 24 characters)
a. Press the + or – key until the desired character is displayed on the LCD screen,
b. Continue selecting characters and pressing Character Select (
Rev. 1.01
1. ___
3. ___
).
).
).
and then press Character Select (
the KD6/HD6.
characters in the password have been sent to the KD6/HD6. The characters will
appear as astericks (*) on the monitor display for security purposes.
).
).
and then press Character Select (
the KD6/HD6.
desired title is displayed on the monitor.
) key.
). The controller sends the character to
ABC
). The controller sends the character to
ABC
39
) to
) until all the
ABC
) until the
ABC
900.0800
19-Jun-06