Recall Preshot - Honeywell HEGS5000 User Manual

5.2.2 Program PreShot, Continued
g. Press the +/- key until upper case D is displayed on the controller LCD and then
h. Press the +/- key until lower case o is displayed on the controller LCD and then
i.
j.
k. Press the Enter (
8. Press the +/- key until upper/lower case S is displayed on the controller LCD and
then press Character Select (
9. Program another PreShot or press Clear/Manual (
10. Press Dome Menu (
on the controller LCD.

5.2.3 Recall PreShot

The first 10 PreShots (Views) are available as scratchpad PreShots. These can be saved
and recalled by the operator. PreShots (Views) 11-99 can only be recalled by the
operator and not saved.
To recall a PreShot or view, enter the PreShot number (0-99) using the numeric
keypad and press the PreShot (
Example: To recall PreShot 11:
1. Press 1
2. Press 1 again.
3. Press PreShot (
Rev. 1.01
press Character Select (
press Character Select (
Press the +/- key until lower case o is displayed on the controller LCD and then
press Character Select (
Press the +/- key until lower case r is displayed on the controller LCD and then
press Character Select (
) key.
1. ___
) or press Menu Esc (
3. ___
).
).
ABC
).
ABC
).
ABC
).
ABC
).
ABC
) key.
28
) to exit.
1. ____
2. ____ )three times to exit the menus
3. ____
900.0800
19-Jun-06