Sony KP-FX43M31 Service Manual page 53

2. Red Adjustment
1) Place a cap on the blue lens so that green and red colors are
displayed.
2) Press "3" button on the commander to select RED mode.
3) Adjust the following items so that blue lines overlap with
green lines.
• RED CENT (horizontally/vertically)
• RED SKEW (horizontally/vertically)
• RED SIZE (horizontally/vertically)
• RED LIN (horizontally)
• RED MSIZ (horizontally)
• RED MLIN (horizontally)
• RED PIN (horizontally/vertically)
• RED KEY (/vertically)
4) Press "9" button on the commander to enter the fine adjust-
ment mode.
5) Make fine adjustment so that horizontal lines and vertical
lines overlap with green lines.
6) Press "9" button on the commander to return to the rough
adjustment mode.
3. Blue Adjustment
1) Place a cap on the red lens so that green and blue colors are
displayed.
2) Press "3" button on the commander to select BLUE mode.
3) Hereinafter, use same manner as that of blue adjustment to
adjust so that the red lines overlap with green lines.3.
Blue Adjustment
4. Registration Data Writing
1) Select " PJE "service item.
Ex.PJE 00 FDIS
2) Select " PJE 03 ALCP" change date " 00" to " 01" using Joy
Stick Key, Then push " MUTE" + " 0" confirm red ALCP
OSD appear.
3) Regi data of DRC1250(PAL) is copied to all other mode.
When ALCP OSD disappear, data copy is finished.
<PJE adjusted DATA ALL COPY>
DRC1250
(50 Hz)
– 53 –
KP-FX43M31/M61/M91
KP-FX53M31/M61/M91
RM-998
DRC100
(50 Hz)
DRC1250
(60 Hz)
DRC1250
V Comp
(50 Hz)
DRC120
(60 Hz)
DRC100
V Comp
(50 Hz)
DRC1250
V Comp
(60 Hz)
HD
(50 Hz)
DRC120
V Comp
(60 Hz)
HD
(60 Hz)