2-14 HIGH-VOLTAGE CABLE
INSTALLATION AND REMOVAL
(1) Remover
1 Rubber cap
2 HV cable turn 90
2-15. MECHASEAL
*
: 1.When installing the Machaseal assy (RED, and GREEN),
be sure to reuse the Plate shading.
2.Check alignment to make sure the Plate shadings are the right
positions as following Fig 2-5.
(2) Installation
Removing the arrow-marked screw is strictly inhibited.
If removed, it may cause liquid spill.
9 Cushion (Geen, Red only)
1 Four screws
(BVTP 4X16)
– 16 –
KP-FX43M31/M61/M91
KP-FX53M31/M61/M91
2 Rubber cap
1 HV cable
Hook
Gutter
5 Four screws
(BVTP 4X16)
8
Plate shading (Green, Red only)
*
7 Extension spring
6 Mechaseal assy (R)
4 Deflection yoke
Shading
Fly nut
Fig 2-5
RM-998